Struct stm32_metapac::sai::regs::Clrfr

#[repr(transparent)]
pub struct Clrfr(pub u32);

Clear flag register

Tuple Fields

0: u32

Implementations

impl Clrfr

pub const fn covrudr(&self) -> bool

Clear overrun / underrun. This bit is write only. Programming this bit to 1 clears the OVRUDR flag in the SAI_xSR register. Reading this bit always returns the value 0.

pub fn set_covrudr(&mut self, val: bool)

Clear overrun / underrun. This bit is write only. Programming this bit to 1 clears the OVRUDR flag in the SAI_xSR register. Reading this bit always returns the value 0.

pub const fn cmutedet(&self) -> bool

Mute detection flag. This bit is write only. Programming this bit to 1 clears the MUTEDET flag in the SAI_xSR register. Reading this bit always returns the value 0.

pub fn set_cmutedet(&mut self, val: bool)

Mute detection flag. This bit is write only. Programming this bit to 1 clears the MUTEDET flag in the SAI_xSR register. Reading this bit always returns the value 0.

pub const fn cwckcfg(&self) -> bool

Clear wrong clock configuration flag. This bit is write only. Programming this bit to 1 clears the WCKCFG flag in the SAI_xSR register. This bit is used only when the audio block is set as master (MODE[1] = 0) and NODIV = 0 in the SAI_xCR1 register. Reading this bit always returns the value 0.

pub fn set_cwckcfg(&mut self, val: bool)

Clear wrong clock configuration flag. This bit is write only. Programming this bit to 1 clears the WCKCFG flag in the SAI_xSR register. This bit is used only when the audio block is set as master (MODE[1] = 0) and NODIV = 0 in the SAI_xCR1 register. Reading this bit always returns the value 0.

pub const fn ccnrdy(&self) -> bool

Clear Codec not ready flag. This bit is write only. Programming this bit to 1 clears the CNRDY flag in the SAI_xSR register. This bit is used only when the AC97 audio protocol is selected in the SAI_xCR1 register. Reading this bit always returns the value 0.

pub fn set_ccnrdy(&mut self, val: bool)

Clear Codec not ready flag. This bit is write only. Programming this bit to 1 clears the CNRDY flag in the SAI_xSR register. This bit is used only when the AC97 audio protocol is selected in the SAI_xCR1 register. Reading this bit always returns the value 0.

pub const fn cafsdet(&self) -> bool

Clear anticipated frame synchronization detection flag. This bit is write only. Programming this bit to 1 clears the AFSDET flag in the SAI_xSR register. It is not used in AC97or SPDIF mode. Reading this bit always returns the value 0.

pub fn set_cafsdet(&mut self, val: bool)

Clear anticipated frame synchronization detection flag. This bit is write only. Programming this bit to 1 clears the AFSDET flag in the SAI_xSR register. It is not used in AC97or SPDIF mode. Reading this bit always returns the value 0.

pub const fn clfsdet(&self) -> bool

Clear late frame synchronization detection flag. This bit is write only. Programming this bit to 1 clears the LFSDET flag in the SAI_xSR register. This bit is not used in AC97or SPDIF mode Reading this bit always returns the value 0.

pub fn set_clfsdet(&mut self, val: bool)

Clear late frame synchronization detection flag. This bit is write only. Programming this bit to 1 clears the LFSDET flag in the SAI_xSR register. This bit is not used in AC97or SPDIF mode Reading this bit always returns the value 0.

Trait Implementations

impl Clone for Clrfr

fn clone(&self) -> Clrfr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Clrfr

fn default() -> Clrfr

Returns the “default value” for a type.

impl PartialEq for Clrfr

fn eq(&self, other: &Clrfr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Clrfr

impl Eq for Clrfr

impl StructuralPartialEq for Clrfr