Struct stm32_metapac::rcc::Rcc

pub struct Rcc { /* private fields */ }

Reset and clock control

Implementations

impl Rcc

pub const unsafe fn from_ptr(ptr: *mut ()) -> Self

pub const fn as_ptr(&self) -> *mut ()

pub const fn cr(self) -> Reg<Cr, RW>

clock control register

pub const fn pllcfgr(self) -> Reg<Pllcfgr, RW>

PLL configuration register

pub const fn cfgr(self) -> Reg<Cfgr, RW>

clock configuration register

pub const fn cir(self) -> Reg<Cir, RW>

clock interrupt register

pub const fn ahb1rstr(self) -> Reg<Ahb1rstr, RW>

AHB1 peripheral reset register

pub const fn ahb2rstr(self) -> Reg<Ahb2rstr, RW>

AHB2 peripheral reset register

pub const fn ahb3rstr(self) -> Reg<Ahb3rstr, RW>

AHB3 peripheral reset register

pub const fn apb1rstr(self) -> Reg<Apb1rstr, RW>

APB1 peripheral reset register

pub const fn apb2rstr(self) -> Reg<Apb2rstr, RW>

APB2 peripheral reset register

pub const fn ahb1enr(self) -> Reg<Ahb1enr, RW>

AHB1 peripheral clock register

pub const fn ahb2enr(self) -> Reg<Ahb2enr, RW>

AHB2 peripheral clock enable register

pub const fn ahb3enr(self) -> Reg<Ahb3enr, RW>

AHB3 peripheral clock enable register

pub const fn apb1enr(self) -> Reg<Apb1enr, RW>

APB1 peripheral clock enable register

pub const fn apb2enr(self) -> Reg<Apb2enr, RW>

APB2 peripheral clock enable register

pub const fn ahb1lpenr(self) -> Reg<Ahb1lpenr, RW>

AHB1 peripheral clock enable in low power mode register

pub const fn ahb2lpenr(self) -> Reg<Ahb2lpenr, RW>

AHB2 peripheral clock enable in low power mode register

pub const fn ahb3lpenr(self) -> Reg<Ahb3lpenr, RW>

AHB3 peripheral clock enable in low power mode register

pub const fn apb1lpenr(self) -> Reg<Apb1lpenr, RW>

APB1 peripheral clock enable in low power mode register

pub const fn apb2lpenr(self) -> Reg<Apb2lpenr, RW>

APB2 peripheral clock enabled in low power mode register

pub const fn bdcr(self) -> Reg<Bdcr, RW>

Backup domain control register

pub const fn csr(self) -> Reg<Csr, RW>

clock control & status register

pub const fn sscgr(self) -> Reg<Sscgr, RW>

spread spectrum clock generation register

pub const fn plli2scfgr(self) -> Reg<Plli2scfgr, RW>

PLLI2S configuration register

pub const fn pllsaicfgr(self) -> Reg<Pllsaicfgr, RW>

PLL configuration register

pub const fn dckcfgr1(self) -> Reg<Dckcfgr1, RW>

dedicated clocks configuration register

pub const fn dckcfgr2(self) -> Reg<Dckcfgr2, RW>

dedicated clocks configuration register

Trait Implementations

impl Clone for Rcc

fn clone(&self) -> Rcc

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl PartialEq for Rcc

fn eq(&self, other: &Rcc) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Rcc

impl Eq for Rcc

impl Send for Rcc

impl StructuralEq for Rcc

impl StructuralPartialEq for Rcc

impl Sync for Rcc