Struct stm32_metapac::can::regs::Dbtp

#[repr(transparent)]
pub struct Dbtp(pub u32);

FDCAN data bit timing and prescaler register

Tuple Fields

0: u32

Implementations

impl Dbtp

pub const fn dsjw(&self) -> u8

Synchronization jump width. Must always be smaller than DTSEG2, valid values are 0 to 15. The value used by the hardware is the one programmed, incremented by 1: tSJW = (DSJW + 1) x tq.

pub fn set_dsjw(&mut self, val: u8)

Synchronization jump width. Must always be smaller than DTSEG2, valid values are 0 to 15. The value used by the hardware is the one programmed, incremented by 1: tSJW = (DSJW + 1) x tq.

pub const fn dtseg2(&self) -> u8

Data time segment after sample point. Valid values are 0 to 15. The value used by the hardware is the one programmed, incremented by 1, i.e. tBS2 = (DTSEG2 + 1) x tq

pub fn set_dtseg2(&mut self, val: u8)

Data time segment after sample point. Valid values are 0 to 15. The value used by the hardware is the one programmed, incremented by 1, i.e. tBS2 = (DTSEG2 + 1) x tq

pub const fn dtseg1(&self) -> u8

Data time segment before sample point. Valid values are 0 to 31. The value used by the hardware is the one programmed, incremented by 1, i.e. tBS1 = (DTSEG1 + 1) x tq

pub fn set_dtseg1(&mut self, val: u8)

Data time segment before sample point. Valid values are 0 to 31. The value used by the hardware is the one programmed, incremented by 1, i.e. tBS1 = (DTSEG1 + 1) x tq

pub const fn dbrp(&self) -> u8

Data bit rate prescaler. The value by which the oscillator frequency is divided to generate the bit time quanta. The bit time is built up from a multiple of this quanta. Valid values for the Baud Rate Prescaler are 0 to 31. The hardware interpreters this value as the value programmed plus 1

pub fn set_dbrp(&mut self, val: u8)

Data bit rate prescaler. The value by which the oscillator frequency is divided to generate the bit time quanta. The bit time is built up from a multiple of this quanta. Valid values for the Baud Rate Prescaler are 0 to 31. The hardware interpreters this value as the value programmed plus 1

pub const fn tdc(&self) -> bool

Transceiver delay compensation

pub fn set_tdc(&mut self, val: bool)

Transceiver delay compensation

Trait Implementations

impl Clone for Dbtp

fn clone(&self) -> Dbtp

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Dbtp

fn default() -> Dbtp

Returns the “default value” for a type.

impl PartialEq for Dbtp

fn eq(&self, other: &Dbtp) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Dbtp

impl Eq for Dbtp

impl StructuralPartialEq for Dbtp