Struct stm32_metapac::flash::regs::Eccdetr

#[repr(transparent)]
pub struct Eccdetr(pub u32);

FLASH ECC detection register

Tuple Fields

0: u32

Implementations

impl Eccdetr

pub const fn addr_ecc(&self) -> u16

ECC error address When an ECC error occurs (double detection) during a read operation, the ADDR_ECC contains the address that generated the error. ADDR_ECC is reset when the flag error is reset. The embedded Flash memory programs the address in this register only when no ECC error flags are set. This means that only the first address that generated an double ECC error is saved. The address in ADDR_ECC is relative to the Flash memory area where the error occurred (user Flash memory, system Flash memory, data area, read-only/OTP area).

pub fn set_addr_ecc(&mut self, val: u16)

ECC error address When an ECC error occurs (double detection) during a read operation, the ADDR_ECC contains the address that generated the error. ADDR_ECC is reset when the flag error is reset. The embedded Flash memory programs the address in this register only when no ECC error flags are set. This means that only the first address that generated an double ECC error is saved. The address in ADDR_ECC is relative to the Flash memory area where the error occurred (user Flash memory, system Flash memory, data area, read-only/OTP area).

pub const fn bk_ecc(&self) -> bool

ECC fail bank for double ECC Error It indicates which bank is concerned by ECC error

pub fn set_bk_ecc(&mut self, val: bool)

ECC fail bank for double ECC Error It indicates which bank is concerned by ECC error

pub const fn sysf_ecc(&self) -> bool

ECC fail for double ECC error in system Flash memory It indicates if system Flash memory is concerned by ECC error.

pub fn set_sysf_ecc(&mut self, val: bool)

ECC fail for double ECC error in system Flash memory It indicates if system Flash memory is concerned by ECC error.

pub const fn otp_ecc(&self) -> bool

OTP ECC error bit This bit is set to 1 when double ECC detection occurred during the last read operation from the read-only/ OTP area. The address of the ECC error is available in ADDR_ECC bit field.

pub fn set_otp_ecc(&mut self, val: bool)

OTP ECC error bit This bit is set to 1 when double ECC detection occurred during the last read operation from the read-only/ OTP area. The address of the ECC error is available in ADDR_ECC bit field.

pub const fn eccd(&self) -> bool

ECC detection set by hardware when two ECC error has been detected. When this bit is set, a NMI is generated. Cleared by writing 1. Needs to be cleared in order to detect subsequent double ECC errors.

pub fn set_eccd(&mut self, val: bool)

ECC detection set by hardware when two ECC error has been detected. When this bit is set, a NMI is generated. Cleared by writing 1. Needs to be cleared in order to detect subsequent double ECC errors.

Trait Implementations

impl Clone for Eccdetr

fn clone(&self) -> Eccdetr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Eccdetr

fn default() -> Eccdetr

Returns the “default value” for a type.

impl PartialEq for Eccdetr

fn eq(&self, other: &Eccdetr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Eccdetr

impl Eq for Eccdetr

impl StructuralPartialEq for Eccdetr