Struct stm32_metapac::flash::regs::Optsr

#[repr(transparent)]
pub struct Optsr(pub u32);

Expand description

FLASH option status register

Tuple Fields§

§0: u32

Implementations§

§

impl Optsr

pub const fn bor_lev(&self) -> OptsrBorLev

Brownout level option status bit These bits reflects the power level that generates a system reset. 00 or 11: BOR Level 1, the threshold level is low (around 2.1�V)

pub fn set_bor_lev(&mut self, val: OptsrBorLev)

Brownout level option status bit These bits reflects the power level that generates a system reset. 00 or 11: BOR Level 1, the threshold level is low (around 2.1�V)

pub const fn borh_en(&self) -> bool

Brownout high enable

pub fn set_borh_en(&mut self, val: bool)

Brownout high enable

pub const fn iwdg_sw(&self) -> OptsrIwdgSw

IWDG control mode option status bit

pub fn set_iwdg_sw(&mut self, val: OptsrIwdgSw)

IWDG control mode option status bit

pub const fn wwdg_sw(&self) -> OptsrWwdgSw

WWDG control mode option status bit

pub fn set_wwdg_sw(&mut self, val: OptsrWwdgSw)

WWDG control mode option status bit

pub const fn nrst_stop(&self) -> OptsrNrstStop

Core domain Stop entry reset option status bit

pub fn set_nrst_stop(&mut self, val: OptsrNrstStop)

Core domain Stop entry reset option status bit

pub const fn nrst_stdby(&self) -> OptsrNrstStdby

Core domain Standby entry reset option status bit

pub fn set_nrst_stdby(&mut self, val: OptsrNrstStdby)

Core domain Standby entry reset option status bit

pub const fn product_state(&self) -> u8

Life state code (based on Hamming 8,4). More information in Section�7.6.11: Product state transitions.

pub fn set_product_state(&mut self, val: u8)

Life state code (based on Hamming 8,4). More information in Section�7.6.11: Product state transitions.

pub const fn io_vdd_hslv(&self) -> OptsrIoVddHslv

High-speed IO at low V_DD voltage configuration bit. This bit can be set only with V_DD below 2.7�V.

pub fn set_io_vdd_hslv(&mut self, val: OptsrIoVddHslv)

High-speed IO at low V_DD voltage configuration bit. This bit can be set only with V_DD below 2.7�V.

pub const fn io_vddio2_hslv(&self) -> OptsrIoVddioHslv

High-speed IO at low V_DDIO2 voltage configuration bit. This bit can be set only with V_DDIO2 below 2.7�V.

pub fn set_io_vddio2_hslv(&mut self, val: OptsrIoVddioHslv)

High-speed IO at low V_DDIO2 voltage configuration bit. This bit can be set only with V_DDIO2 below 2.7�V.

pub const fn iwdg_stop(&self) -> OptsrIwdgStop

IWDG Stop mode freeze option status bit When set the independent watchdog IWDG is in system Stop mode.

pub fn set_iwdg_stop(&mut self, val: OptsrIwdgStop)

IWDG Stop mode freeze option status bit When set the independent watchdog IWDG is in system Stop mode.

pub const fn iwdg_stdby(&self) -> OptsrIwdgStdby

IWDG Standby mode freeze option status bit When set the independent watchdog IWDG is frozen in system Standby mode.

pub fn set_iwdg_stdby(&mut self, val: OptsrIwdgStdby)

IWDG Standby mode freeze option status bit When set the independent watchdog IWDG is frozen in system Standby mode.

pub const fn boot_ube(&self) -> OptsrBootUbe

Available only on cryptography enabled devices. Unique boot entry control, selects either ST or OEM iRoT for secure boot.

pub fn set_boot_ube(&mut self, val: OptsrBootUbe)

Available only on cryptography enabled devices. Unique boot entry control, selects either ST or OEM iRoT for secure boot.

pub const fn swap_bank(&self) -> OptsrSwapBank

Bank swapping option status bit SWAP_BANK reflects whether Bank1 and Bank2 are swapped or not. SWAP_BANK is loaded to SWAP_BANK of FLASH_OPTCR after a reset.

pub fn set_swap_bank(&mut self, val: OptsrSwapBank)

Bank swapping option status bit SWAP_BANK reflects whether Bank1 and Bank2 are swapped or not. SWAP_BANK is loaded to SWAP_BANK of FLASH_OPTCR after a reset.