Struct stm32_metapac::dts::regs::Sr

#[repr(transparent)]
pub struct Sr(pub u32);

Temperature sensor status register.

Tuple Fields

0: u32

Implementations

impl Sr

pub const fn itef(&self) -> bool

Interrupt flag for end of measurement on temperature sensor 1, synchronized on PCLK. This bit is set by hardware when a temperature measure is done. It is cleared by software by writing 1 to the TS2_CITEF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_ITEFEN bit is set.

pub fn set_itef(&mut self, val: bool)

Interrupt flag for end of measurement on temperature sensor 1, synchronized on PCLK. This bit is set by hardware when a temperature measure is done. It is cleared by software by writing 1 to the TS2_CITEF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_ITEFEN bit is set.

pub const fn itlf(&self) -> bool

Interrupt flag for low threshold on temperature sensor 1, synchronized on PCLK. This bit is set by hardware when the low threshold is set and reached. It is cleared by software by writing 1 to the TS1_CITLF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_ITLFEN bit is set.

pub fn set_itlf(&mut self, val: bool)

Interrupt flag for low threshold on temperature sensor 1, synchronized on PCLK. This bit is set by hardware when the low threshold is set and reached. It is cleared by software by writing 1 to the TS1_CITLF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_ITLFEN bit is set.

pub const fn ithf(&self) -> bool

Interrupt flag for high threshold on temperature sensor 1, synchronized on PCLK This bit is set by hardware when the high threshold is set and reached. It is cleared by software by writing 1 to the TS1_CITHF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_ITHFEN bit is set.

pub fn set_ithf(&mut self, val: bool)

Interrupt flag for high threshold on temperature sensor 1, synchronized on PCLK This bit is set by hardware when the high threshold is set and reached. It is cleared by software by writing 1 to the TS1_CITHF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_ITHFEN bit is set.

pub const fn aitef(&self) -> bool

Asynchronous interrupt flag for end of measure on temperature sensor 1 This bit is set by hardware when a temperature measure is done. It is cleared by software by writing 1 to the TS1_CAITEF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_AITEFEN bit is set.

pub fn set_aitef(&mut self, val: bool)

Asynchronous interrupt flag for end of measure on temperature sensor 1 This bit is set by hardware when a temperature measure is done. It is cleared by software by writing 1 to the TS1_CAITEF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_AITEFEN bit is set.

pub const fn aitlf(&self) -> bool

Asynchronous interrupt flag for low threshold on temperature sensor 1 This bit is set by hardware when the low threshold is reached. It is cleared by software by writing 1 to the TS1_CAITLF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_AITLFEN bit is set.

pub fn set_aitlf(&mut self, val: bool)

Asynchronous interrupt flag for low threshold on temperature sensor 1 This bit is set by hardware when the low threshold is reached. It is cleared by software by writing 1 to the TS1_CAITLF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_AITLFEN bit is set.

pub const fn aithf(&self) -> bool

Asynchronous interrupt flag for high threshold on temperature sensor 1 This bit is set by hardware when the high threshold is reached. It is cleared by software by writing 1 to the TS1_CAITHF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_AITHFEN bit is set.

pub fn set_aithf(&mut self, val: bool)

Asynchronous interrupt flag for high threshold on temperature sensor 1 This bit is set by hardware when the high threshold is reached. It is cleared by software by writing 1 to the TS1_CAITHF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_AITHFEN bit is set.

pub const fn rdy(&self) -> bool

Temperature sensor 1 ready flag This bit is set and reset by hardware. It indicates that a measurement is ongoing.

pub fn set_rdy(&mut self, val: bool)

Temperature sensor 1 ready flag This bit is set and reset by hardware. It indicates that a measurement is ongoing.

Trait Implementations

impl Clone for Sr

fn clone(&self) -> Sr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Sr

fn default() -> Sr

Returns the “default value” for a type.

impl PartialEq for Sr

fn eq(&self, other: &Sr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Sr

impl Eq for Sr

impl StructuralPartialEq for Sr