Struct stm32_metapac::tamp::regs::Atcr1

#[repr(transparent)]
pub struct Atcr1(pub u32);

TAMP active tamper control register 1.

Tuple Fields

0: u32

Implementations

impl Atcr1

pub const fn tampam(&self, n: usize) -> bool

Tamper x active mode. (x=1-8)

pub fn set_tampam(&mut self, n: usize, val: bool)

Tamper x active mode. (x=1-8)

pub const fn atosel(&self, n: usize) -> u8

Active tamper shared output x selection The selected output must be available in the package pinout. (x=1-4)

pub fn set_atosel(&mut self, n: usize, val: u8)

Active tamper shared output x selection The selected output must be available in the package pinout. (x=1-4)

pub const fn atcksel(&self) -> u8

Active tamper RTC asynchronous prescaler clock selection These bits selects the RTC asynchronous prescaler stage output.The selected clock is CK_ATPRE. fCK_ATPRE = fRTCCLK / 2ATCKSEL when (PREDIV_A+1) = 128. … These bits can be written only when all active tampers are disabled. The write protection remains for up to 1.5 ck_atpre cycles after all the active tampers are disable.

pub fn set_atcksel(&mut self, val: u8)

Active tamper RTC asynchronous prescaler clock selection These bits selects the RTC asynchronous prescaler stage output.The selected clock is CK_ATPRE. fCK_ATPRE = fRTCCLK / 2ATCKSEL when (PREDIV_A+1) = 128. … These bits can be written only when all active tampers are disabled. The write protection remains for up to 1.5 ck_atpre cycles after all the active tampers are disable.

pub const fn atper(&self) -> u8

Active tamper output change period The tamper output is changed every CK_ATPER = (2ATPER x CK_ATPRE) cycles. Refer to.

pub fn set_atper(&mut self, val: u8)

Active tamper output change period The tamper output is changed every CK_ATPER = (2ATPER x CK_ATPRE) cycles. Refer to.

pub const fn atoshare(&self) -> bool

Active tamper output sharing TAMP_IN1 is compared with TAMPOUTSEL1 TAMP_IN2 is compared with TAMPOUTSEL2 TAMP_IN3 is compared with TAMPOUTSEL3 TAMP_IN4 is compared with TAMPOUTSEL4 TAMP_IN5 is compared with TAMPOUTSEL5 TAMP_IN6 is compared with TAMPOUTSEL6 TAMP_IN7 is compared with TAMPOUTSEL7 TAMP_IN8 is compared with TAMPOUTSEL8.

pub fn set_atoshare(&mut self, val: bool)

Active tamper output sharing TAMP_IN1 is compared with TAMPOUTSEL1 TAMP_IN2 is compared with TAMPOUTSEL2 TAMP_IN3 is compared with TAMPOUTSEL3 TAMP_IN4 is compared with TAMPOUTSEL4 TAMP_IN5 is compared with TAMPOUTSEL5 TAMP_IN6 is compared with TAMPOUTSEL6 TAMP_IN7 is compared with TAMPOUTSEL7 TAMP_IN8 is compared with TAMPOUTSEL8.

pub const fn flten(&self) -> bool

Active tamper filter enable.

pub fn set_flten(&mut self, val: bool)

Active tamper filter enable.

Trait Implementations

impl Clone for Atcr1

fn clone(&self) -> Atcr1

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Atcr1

fn default() -> Atcr1

Returns the “default value” for a type.

impl PartialEq for Atcr1

fn eq(&self, other: &Atcr1) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Atcr1

impl Eq for Atcr1

impl StructuralPartialEq for Atcr1