Struct stm32_metapac::syscfg::regs::Pmcr

#[repr(transparent)]
pub struct Pmcr(pub u32);

SBS product mode and configuration register

Tuple Fields

0: u32

Implementations

impl Pmcr

pub const fn boosten(&self) -> bool

booster enable Set this bit to reduce the total harmonic distortion of the analog switch when the processor supply is below 2.7 V. The booster can be activated to guaranty AC performance on analog switch when the supply is below 2.7 V. When the booster is activated, the analog switch performances are the same as with the full voltage range.

pub fn set_boosten(&mut self, val: bool)

booster enable Set this bit to reduce the total harmonic distortion of the analog switch when the processor supply is below 2.7 V. The booster can be activated to guaranty AC performance on analog switch when the supply is below 2.7 V. When the booster is activated, the analog switch performances are the same as with the full voltage range.

pub const fn boostvddsel(&self) -> bool

booster VDD selection Note: Booster must not be used when VDDA < 2.7 V, but VDD > 2.7 V (add current consumption). When both VDD < 2.7 V and VDDA < 2.7 V, booster is needed to get full AC performances from I/O analog switches.

pub fn set_boostvddsel(&mut self, val: bool)

booster VDD selection Note: Booster must not be used when VDDA < 2.7 V, but VDD > 2.7 V (add current consumption). When both VDD < 2.7 V and VDDA < 2.7 V, booster is needed to get full AC performances from I/O analog switches.

pub const fn pb6_fmplus(&self) -> bool

Fast-mode Plus command on PB(6)

pub fn set_pb6_fmplus(&mut self, val: bool)

Fast-mode Plus command on PB(6)

pub const fn pb7_fmplus(&self) -> bool

Fast-mode Plus command on PB(7)

pub fn set_pb7_fmplus(&mut self, val: bool)

Fast-mode Plus command on PB(7)

pub const fn pb8_fmplus(&self) -> bool

Fast-mode Plus command on PB(8)

pub fn set_pb8_fmplus(&mut self, val: bool)

Fast-mode Plus command on PB(8)

pub const fn pb9_fmplus(&self) -> bool

Fast-mode Plus command on PB(9)

pub fn set_pb9_fmplus(&mut self, val: bool)

Fast-mode Plus command on PB(9)

pub const fn eth_sel_phy(&self) -> EthSelPhy

Ethernet PHY interface selection Other: reserved

pub fn set_eth_sel_phy(&mut self, val: EthSelPhy)

Ethernet PHY interface selection Other: reserved

Trait Implementations

impl Clone for Pmcr

fn clone(&self) -> Pmcr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Pmcr

fn default() -> Pmcr

Returns the “default value” for a type.

impl PartialEq for Pmcr

fn eq(&self, other: &Pmcr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Pmcr

impl Eq for Pmcr

impl StructuralPartialEq for Pmcr