Struct stm32_metapac::i3c::regs::Timingr0

#[repr(transparent)]
pub struct Timingr0(pub u32);

I3C timing register 0.

Tuple Fields

0: u32

Implementations

impl Timingr0

pub const fn scll_pp(&self) -> u8

SCL low duration in I3C push-pull phases, in number of kernel clocks cycles: tSCLL_PP = (SCLL_PP + 1) x tI3CCLK SCLL_PP is used to generate tLOW (I3C) timing.

pub fn set_scll_pp(&mut self, val: u8)

SCL low duration in I3C push-pull phases, in number of kernel clocks cycles: tSCLL_PP = (SCLL_PP + 1) x tI3CCLK SCLL_PP is used to generate tLOW (I3C) timing.

pub const fn sclh_i3c(&self) -> u8

SCL high duration, used for I3C messages (both in push-pull and open-drain phases), in number of kernel clocks cycles: tSCLH_I3C = (SCLH_I3C + 1) x tI3CCLK SCLH_I3C is used to generate both tHIGH (I3C) and tHIGH_MIXED timings.

pub fn set_sclh_i3c(&mut self, val: u8)

SCL high duration, used for I3C messages (both in push-pull and open-drain phases), in number of kernel clocks cycles: tSCLH_I3C = (SCLH_I3C + 1) x tI3CCLK SCLH_I3C is used to generate both tHIGH (I3C) and tHIGH_MIXED timings.

pub const fn scll_od(&self) -> u8

SCL low duration in open-drain phases, used for legacy I2C commands and for I3C open-drain phases (address header phase following a START, not a Repeated START), in number of kernel clocks cycles: tSCLL_OD = (SCLL_OD + 1) x tI3CCLK SCLL_OD is used to generate both tLOW (I2C) and tLOW_OD timings (max. of the two).

pub fn set_scll_od(&mut self, val: u8)

SCL low duration in open-drain phases, used for legacy I2C commands and for I3C open-drain phases (address header phase following a START, not a Repeated START), in number of kernel clocks cycles: tSCLL_OD = (SCLL_OD + 1) x tI3CCLK SCLL_OD is used to generate both tLOW (I2C) and tLOW_OD timings (max. of the two).

pub const fn sclh_i2c(&self) -> u8

SCL high duration, used for legacy I2C commands, in number of kernel clocks cycles: tSCLH_I2C = (SCLH_I2C + 1) x tI3CCLK SCLH_I2C is used to generate tHIGH (I2C) timing.

pub fn set_sclh_i2c(&mut self, val: u8)

SCL high duration, used for legacy I2C commands, in number of kernel clocks cycles: tSCLH_I2C = (SCLH_I2C + 1) x tI3CCLK SCLH_I2C is used to generate tHIGH (I2C) timing.

Trait Implementations

impl Clone for Timingr0

fn clone(&self) -> Timingr0

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Timingr0

fn default() -> Timingr0

Returns the “default value” for a type.

impl PartialEq for Timingr0

fn eq(&self, other: &Timingr0) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Timingr0

impl Eq for Timingr0

impl StructuralPartialEq for Timingr0