Struct stm32_metapac::dts::regs::Itenr

#[repr(transparent)]
pub struct Itenr(pub u32);

Temperature sensor interrupt enable register.

Tuple Fields

0: u32

Implementations

impl Itenr

pub const fn iteen(&self) -> bool

Interrupt enable flag for end of measurement on temperature sensor 1, synchronized on PCLK. This bit are set and cleared by software. It enables the synchronous interrupt for end of measurement.

pub fn set_iteen(&mut self, val: bool)

Interrupt enable flag for end of measurement on temperature sensor 1, synchronized on PCLK. This bit are set and cleared by software. It enables the synchronous interrupt for end of measurement.

pub const fn itlen(&self) -> bool

Interrupt enable flag for low threshold on temperature sensor 1, synchronized on PCLK. This bit are set and cleared by software. It enables the synchronous interrupt when the measure reaches or is below the low threshold.

pub fn set_itlen(&mut self, val: bool)

Interrupt enable flag for low threshold on temperature sensor 1, synchronized on PCLK. This bit are set and cleared by software. It enables the synchronous interrupt when the measure reaches or is below the low threshold.

pub const fn ithen(&self) -> bool

Interrupt enable flag for high threshold on temperature sensor 1, synchronized on PCLK. This bit are set and cleared by software. It enables the interrupt when the measure reaches or is above the high threshold.

pub fn set_ithen(&mut self, val: bool)

Interrupt enable flag for high threshold on temperature sensor 1, synchronized on PCLK. This bit are set and cleared by software. It enables the interrupt when the measure reaches or is above the high threshold.

pub const fn aiteen(&self) -> bool

Asynchronous interrupt enable flag for end of measurement on temperature sensor 1 This bit are set and cleared by software. It enables the asynchronous interrupt for end of measurement (only when REFCLK_SEL = 1).

pub fn set_aiteen(&mut self, val: bool)

Asynchronous interrupt enable flag for end of measurement on temperature sensor 1 This bit are set and cleared by software. It enables the asynchronous interrupt for end of measurement (only when REFCLK_SEL = 1).

pub const fn aitlen(&self) -> bool

Asynchronous interrupt enable flag for low threshold on temperature sensor 1. This bit are set and cleared by software. It enables the asynchronous interrupt when the temperature is below the low threshold (only when REFCLK_SEL= 1).

pub fn set_aitlen(&mut self, val: bool)

Asynchronous interrupt enable flag for low threshold on temperature sensor 1. This bit are set and cleared by software. It enables the asynchronous interrupt when the temperature is below the low threshold (only when REFCLK_SEL= 1).

pub const fn aithen(&self) -> bool

Asynchronous interrupt enable flag on high threshold for temperature sensor 1. This bit are set and cleared by software. It enables the asynchronous interrupt when the temperature is above the high threshold (only when REFCLK_SEL= 1’’).

pub fn set_aithen(&mut self, val: bool)

Asynchronous interrupt enable flag on high threshold for temperature sensor 1. This bit are set and cleared by software. It enables the asynchronous interrupt when the temperature is above the high threshold (only when REFCLK_SEL= 1’’).

Trait Implementations

impl Clone for Itenr

fn clone(&self) -> Itenr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Itenr

fn default() -> Itenr

Returns the “default value” for a type.

impl PartialEq for Itenr

fn eq(&self, other: &Itenr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Itenr

impl Eq for Itenr

impl StructuralPartialEq for Itenr