Struct stm32_metapac::flash::regs::Ecccorr

#[repr(transparent)]
pub struct Ecccorr(pub u32);

FLASH ECC correction register

Tuple Fields

0: u32

Implementations

impl Ecccorr

pub const fn addr_ecc(&self) -> u16

ECC error address When an ECC error occurs (for single correction) during a read operation, the ADDR_ECC contains the address that generated the error. ADDR_ECC is reset when the flag error is reset. The flash interface programs the address in this register only when no ECC error flags are set. This means that only the first address that generated an ECC error is saved. The address in ADDR_ECC is relative to the flash memory area where the error occurred (user flash memory, system flash memory, data area, read-only/OTP area).

pub fn set_addr_ecc(&mut self, val: u16)

ECC error address When an ECC error occurs (for single correction) during a read operation, the ADDR_ECC contains the address that generated the error. ADDR_ECC is reset when the flag error is reset. The flash interface programs the address in this register only when no ECC error flags are set. This means that only the first address that generated an ECC error is saved. The address in ADDR_ECC is relative to the flash memory area where the error occurred (user flash memory, system flash memory, data area, read-only/OTP area).

pub const fn obk_ecc(&self) -> bool

Single ECC error corrected in flash OB Keys storage area. It indicates the OBK storage concerned by ECC error.

pub fn set_obk_ecc(&mut self, val: bool)

Single ECC error corrected in flash OB Keys storage area. It indicates the OBK storage concerned by ECC error.

pub const fn edata_ecc(&self) -> bool

ECC fail for corrected ECC error in flash high-cycle data area It indicates if flash high-cycle data area is concerned by ECC error.

pub fn set_edata_ecc(&mut self, val: bool)

ECC fail for corrected ECC error in flash high-cycle data area It indicates if flash high-cycle data area is concerned by ECC error.

pub const fn bk_ecc(&self) -> bool

ECC fail bank for corrected ECC error It indicates which bank is concerned by ECC error

pub fn set_bk_ecc(&mut self, val: bool)

ECC fail bank for corrected ECC error It indicates which bank is concerned by ECC error

pub const fn sysf_ecc(&self) -> bool

ECC fail for corrected ECC error in system flash memory It indicates if system flash memory is concerned by ECC error.

pub fn set_sysf_ecc(&mut self, val: bool)

ECC fail for corrected ECC error in system flash memory It indicates if system flash memory is concerned by ECC error.

pub const fn otp_ecc(&self) -> bool

OTP ECC error bit This bit is set to 1 when one single ECC correction occurred during the last successful read operation from the read-only/ OTP area. The address of the ECC error is available in ADDR_ECC bitfield.

pub fn set_otp_ecc(&mut self, val: bool)

OTP ECC error bit This bit is set to 1 when one single ECC correction occurred during the last successful read operation from the read-only/ OTP area. The address of the ECC error is available in ADDR_ECC bitfield.

pub const fn ecccie(&self) -> bool

ECC single correction error interrupt enable bit When ECCCIE bit is set to 1, an interrupt is generated when an ECC single correction error occurs during a read operation.

pub fn set_ecccie(&mut self, val: bool)

ECC single correction error interrupt enable bit When ECCCIE bit is set to 1, an interrupt is generated when an ECC single correction error occurs during a read operation.

pub const fn eccc(&self) -> bool

ECC correction set by hardware when single ECC error has been detected and corrected. Cleared by writing 1.

pub fn set_eccc(&mut self, val: bool)

ECC correction set by hardware when single ECC error has been detected and corrected. Cleared by writing 1.

Trait Implementations

impl Clone for Ecccorr

fn clone(&self) -> Ecccorr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Ecccorr

fn default() -> Ecccorr

Returns the “default value” for a type.

impl PartialEq for Ecccorr

fn eq(&self, other: &Ecccorr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Ecccorr

impl Eq for Ecccorr

impl StructuralPartialEq for Ecccorr