Struct M5cr 

#[repr(transparent)]
pub struct M5cr(pub u32);

RAMCFG memory 5 control register.

Tuple Fields

0: u32

Implementations

impl M5cr

pub const fn ecce(&self) -> bool

ECC enable. This bit reset value is defined by the user option bit configuration. When set, it can be cleared by software only after writing the unlock sequence in the MxECCKEYR register. Note: This bit is reserved and must be kept at reset value in SRAM1 control register.

pub fn set_ecce(&mut self, val: bool)

ECC enable. This bit reset value is defined by the user option bit configuration. When set, it can be cleared by software only after writing the unlock sequence in the MxECCKEYR register. Note: This bit is reserved and must be kept at reset value in SRAM1 control register.

pub const fn ale(&self) -> bool

Address latch enable Note: This bit is reserved and must be kept at reset value in SRAM1 control register.

pub fn set_ale(&mut self, val: bool)

Address latch enable Note: This bit is reserved and must be kept at reset value in SRAM1 control register.

pub const fn sramer(&self) -> bool

SRAM erase This bit can be set by software only after writing the unlock sequence in the ERASEKEY field of the MxERKEYR register. Setting this bit starts the SRAM erase. This bit is automatically cleared by hardware at the end of the erase operation.

pub fn set_sramer(&mut self, val: bool)

SRAM erase This bit can be set by software only after writing the unlock sequence in the ERASEKEY field of the MxERKEYR register. Setting this bit starts the SRAM erase. This bit is automatically cleared by hardware at the end of the erase operation.

Trait Implementations

impl Clone for M5cr

fn clone(&self) -> M5cr

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for M5cr

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for M5cr

fn default() -> M5cr

Returns the “default value” for a type.

impl PartialEq for M5cr

fn eq(&self, other: &M5cr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for M5cr

impl Eq for M5cr

impl StructuralPartialEq for M5cr