Struct stm32_metapac::adc::regs::Difsel

#[repr(transparent)]
pub struct Difsel(pub u32);

Differential mode Selection Register

Tuple Fields

0: u32

Implementations

impl Difsel

pub const fn difsel(&self) -> u32

Differential mode for channels 19 to 0. These bits are set and cleared by software. They allow to select if a channel is configured as Single-ended or Differential mode. DIFSEL[i] = 0: analog input channel is configured in Single-ended mode DIFSEL[i] = 1: analog input channel i is configured in Differential mode Note: The DIFSEL bits corresponding to channels that are either connected to a single-ended I/O port or to an internal channel must be kept their reset value (Single-ended input mode). The software is allowed to write these bits only when the ADC is disabled (ADCAL = 0, JADSTART = 0, JADSTP = 0, ADSTART = 0, ADSTP = 0, ADDIS = 0 and ADEN = 0).

pub fn set_difsel(&mut self, val: u32)

Differential mode for channels 19 to 0. These bits are set and cleared by software. They allow to select if a channel is configured as Single-ended or Differential mode. DIFSEL[i] = 0: analog input channel is configured in Single-ended mode DIFSEL[i] = 1: analog input channel i is configured in Differential mode Note: The DIFSEL bits corresponding to channels that are either connected to a single-ended I/O port or to an internal channel must be kept their reset value (Single-ended input mode). The software is allowed to write these bits only when the ADC is disabled (ADCAL = 0, JADSTART = 0, JADSTP = 0, ADSTART = 0, ADSTP = 0, ADDIS = 0 and ADEN = 0).

Trait Implementations

impl Clone for Difsel

fn clone(&self) -> Difsel

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Difsel

fn default() -> Difsel

Returns the “default value” for a type.

impl PartialEq for Difsel

fn eq(&self, other: &Difsel) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Difsel

impl Eq for Difsel

impl StructuralEq for Difsel

impl StructuralPartialEq for Difsel