Struct stm32_metapac::i3c::regs::Maxrlr

#[repr(transparent)]
pub struct Maxrlr(pub u32);

I3C maximum read length register.

Tuple Fields

0: u32

Implementations

impl Maxrlr

pub const fn ml(&self) -> u16

maximum data write length (when I3C is acting as target) This field is initially written by software when I3C_CFGR.EN=0 and updated by hardware on the reception of SETMWL command. Software is notified of a MWL update by the I3C_EVR.MWLUPF and the corresponding interrupt if enabled. This field is used by hardware to return the value on the I3C bus when the target receives a GETMWL CCC.

pub fn set_ml(&mut self, val: u16)

maximum data write length (when I3C is acting as target) This field is initially written by software when I3C_CFGR.EN=0 and updated by hardware on the reception of SETMWL command. Software is notified of a MWL update by the I3C_EVR.MWLUPF and the corresponding interrupt if enabled. This field is used by hardware to return the value on the I3C bus when the target receives a GETMWL CCC.

pub const fn ibip(&self) -> u8

IBI payload data size, in bytes (when I3C is acting as target) This field is initially written by software when I3C_CFGR.EN=0 to set the number of data bytes to be sent to the controller after an IBI request has been acknowledged.This field may be updated by hardware on the reception of SETMRL command (which potentially also updated IBIP[2:0]). Software is notified of a MRL update by the I3C_EVR.MRLUPF and the corresponding interrupt if enabled. others: same as 100.

pub fn set_ibip(&mut self, val: u8)

IBI payload data size, in bytes (when I3C is acting as target) This field is initially written by software when I3C_CFGR.EN=0 to set the number of data bytes to be sent to the controller after an IBI request has been acknowledged.This field may be updated by hardware on the reception of SETMRL command (which potentially also updated IBIP[2:0]). Software is notified of a MRL update by the I3C_EVR.MRLUPF and the corresponding interrupt if enabled. others: same as 100.

Trait Implementations

impl Clone for Maxrlr

fn clone(&self) -> Maxrlr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Maxrlr

fn default() -> Maxrlr

Returns the “default value” for a type.

impl PartialEq for Maxrlr

fn eq(&self, other: &Maxrlr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Maxrlr

impl Eq for Maxrlr

impl StructuralEq for Maxrlr

impl StructuralPartialEq for Maxrlr