Struct stm32_metapac::i3c::regs::Sr

#[repr(transparent)]
pub struct Sr(pub u32);

I3C status register.

Tuple Fields

0: u32

Implementations

impl Sr

pub const fn xdcnt(&self) -> u16

data counter - When the I3C is acting as controller: number of targets detected on the bus - When the I3C is acting as target: number of transmitted bytes - Whatever the I3C is acting as controller or target: number of data bytes read from or transmitted on the I3C bus during the MID[7:0] message.

pub fn set_xdcnt(&mut self, val: u16)

data counter - When the I3C is acting as controller: number of targets detected on the bus - When the I3C is acting as target: number of transmitted bytes - Whatever the I3C is acting as controller or target: number of data bytes read from or transmitted on the I3C bus during the MID[7:0] message.

pub const fn abt(&self) -> bool

a private read message is completed/aborted prematurely by the target (when the I3C is acting as controller) When the I3C is acting as controller, this bit indicates if the private read data which is transmitted by the target early terminates (i.e. the target drives T bit low earlier vs what does expect the controller in terms of programmed number of read data bytes i.e. I3C_CR.DCNT[15:0]).

pub fn set_abt(&mut self, val: bool)

a private read message is completed/aborted prematurely by the target (when the I3C is acting as controller) When the I3C is acting as controller, this bit indicates if the private read data which is transmitted by the target early terminates (i.e. the target drives T bit low earlier vs what does expect the controller in terms of programmed number of read data bytes i.e. I3C_CR.DCNT[15:0]).

pub const fn dir(&self) -> Dir

message direction Whatever the I3C is acting as controller or target, this bit indicates the direction of the related message on the I3C bus Note: ENTDAA CCC is considered as a write command.

pub fn set_dir(&mut self, val: Dir)

message direction Whatever the I3C is acting as controller or target, this bit indicates the direction of the related message on the I3C bus Note: ENTDAA CCC is considered as a write command.

pub const fn mid(&self) -> u8

message identifier/counter of a given frame (when the I3C is acting as controller) When the I3C is acting as controller, this field identifies the control word message (i.e. I3C_CR) to which the I3C_SR status register refers. First message of a frame is identified with MID[7:0]=0. This field is incremented (by hardware) on the completion of a new message control word (i.e. I3C_CR) over I3C bus. This field is reset for every new frame start.

pub fn set_mid(&mut self, val: u8)

message identifier/counter of a given frame (when the I3C is acting as controller) When the I3C is acting as controller, this field identifies the control word message (i.e. I3C_CR) to which the I3C_SR status register refers. First message of a frame is identified with MID[7:0]=0. This field is incremented (by hardware) on the completion of a new message control word (i.e. I3C_CR) over I3C bus. This field is reset for every new frame start.

Trait Implementations

impl Clone for Sr

fn clone(&self) -> Sr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Sr

fn default() -> Sr

Returns the “default value” for a type.

impl PartialEq for Sr

fn eq(&self, other: &Sr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Sr

impl Eq for Sr

impl StructuralEq for Sr

impl StructuralPartialEq for Sr