Struct stm32_metapac::i3c::regs::Timingr0

#[repr(transparent)]
pub struct Timingr0(pub u32);

I3C timing register 0.

Tuple Fields

0: u32

Implementations

impl Timingr0

pub const fn scll_pp(&self) -> u8

SCL low duration in I3C push-pull phases, in number of kernel clocks cycles: tSCLL_PP = (SCLL_PP + 1) x tI3CCLK SCLL_PP is used to generate tLOW (I3C) timing.

pub fn set_scll_pp(&mut self, val: u8)

SCL low duration in I3C push-pull phases, in number of kernel clocks cycles: tSCLL_PP = (SCLL_PP + 1) x tI3CCLK SCLL_PP is used to generate tLOW (I3C) timing.

pub const fn sclh_i3c(&self) -> u8

SCL high duration, used for I3C messages (both in push-pull and open-drain phases), in number of kernel clocks cycles: tSCLH_I3C = (SCLH_I3C + 1) x tI3CCLK SCLH_I3C is used to generate both tHIGH (I3C) and tHIGH_MIXED timings.

pub fn set_sclh_i3c(&mut self, val: u8)

SCL high duration, used for I3C messages (both in push-pull and open-drain phases), in number of kernel clocks cycles: tSCLH_I3C = (SCLH_I3C + 1) x tI3CCLK SCLH_I3C is used to generate both tHIGH (I3C) and tHIGH_MIXED timings.

pub const fn scll_od(&self) -> u8

SCL low duration in open-drain phases, used for legacy I2C commands and for I3C open-drain phases (address header phase following a START, not a Repeated START), in number of kernel clocks cycles: tSCLL_OD = (SCLL_OD + 1) x tI3CCLK SCLL_OD is used to generate both tLOW (I2C) and tLOW_OD timings (max. of the two).

pub fn set_scll_od(&mut self, val: u8)

SCL low duration in open-drain phases, used for legacy I2C commands and for I3C open-drain phases (address header phase following a START, not a Repeated START), in number of kernel clocks cycles: tSCLL_OD = (SCLL_OD + 1) x tI3CCLK SCLL_OD is used to generate both tLOW (I2C) and tLOW_OD timings (max. of the two).

pub const fn sclh_i2c(&self) -> u8

SCL high duration, used for legacy I2C commands, in number of kernel clocks cycles: tSCLH_I2C = (SCLH_I2C + 1) x tI3CCLK SCLH_I2C is used to generate tHIGH (I2C) timing.

pub fn set_sclh_i2c(&mut self, val: u8)

SCL high duration, used for legacy I2C commands, in number of kernel clocks cycles: tSCLH_I2C = (SCLH_I2C + 1) x tI3CCLK SCLH_I2C is used to generate tHIGH (I2C) timing.

Trait Implementations

impl Clone for Timingr0

fn clone(&self) -> Timingr0

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Timingr0

fn default() -> Timingr0

Returns the “default value” for a type.

impl PartialEq for Timingr0

fn eq(&self, other: &Timingr0) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Timingr0

impl Eq for Timingr0

impl StructuralEq for Timingr0

impl StructuralPartialEq for Timingr0