Struct stm32_metapac::flash::regs::Crcsaddr

#[repr(transparent)]
pub struct Crcsaddr(pub u32);

FLASH CRC start address register.

Tuple Fields

0: u32

Implementations

impl Crcsaddr

pub const fn crc_start_addr(&self) -> u16

CRC start address This register is used when CRC_BY_SECT is cleared. It must be programmed to the address of the first Flash word to use for the CRC calculation, done burst by burst. CRC computation starts at an address aligned to the burst size defined in CRC_BURST of FLASH_CRCCR register. Hence least significant bits [5:0] of the address are set by hardware to 0 (minimum burst size= 64 bytes). The address is relative to the Flash bank.

pub fn set_crc_start_addr(&mut self, val: u16)

CRC start address This register is used when CRC_BY_SECT is cleared. It must be programmed to the address of the first Flash word to use for the CRC calculation, done burst by burst. CRC computation starts at an address aligned to the burst size defined in CRC_BURST of FLASH_CRCCR register. Hence least significant bits [5:0] of the address are set by hardware to 0 (minimum burst size= 64 bytes). The address is relative to the Flash bank.

Trait Implementations

impl Clone for Crcsaddr

fn clone(&self) -> Crcsaddr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Crcsaddr

fn default() -> Crcsaddr

Returns the “default value” for a type.

impl PartialEq for Crcsaddr

fn eq(&self, other: &Crcsaddr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Crcsaddr

impl Eq for Crcsaddr

impl StructuralPartialEq for Crcsaddr