Struct stm32_metapac::syscfg::regs::Cccsr

#[repr(transparent)]
pub struct Cccsr(pub u32);

SBS I/O compensation cell control and status register.

Tuple Fields

0: u32

Implementations

impl Cccsr

pub const fn comp_en(&self) -> bool

Compensation cell enable Set this bit to enable the compensation cell.

pub fn set_comp_en(&mut self, val: bool)

Compensation cell enable Set this bit to enable the compensation cell.

pub const fn comp_codesel(&self) -> bool

Compensation cell code selection This bit selects the code to be applied for the I/O compensation cell.

pub fn set_comp_codesel(&mut self, val: bool)

Compensation cell code selection This bit selects the code to be applied for the I/O compensation cell.

pub const fn octo1_comp_en(&self) -> bool

XSPIM_P1 compensation cell enable Set this bit to enable the XSPIM_P1 compensation cell.

pub fn set_octo1_comp_en(&mut self, val: bool)

XSPIM_P1 compensation cell enable Set this bit to enable the XSPIM_P1 compensation cell.

pub const fn octo1_comp_codesel(&self) -> bool

XSPIM_P1 compensation cell code selection This bit selects the code to be applied for the XSPIM_P1 I/O compensation cell.

pub fn set_octo1_comp_codesel(&mut self, val: bool)

XSPIM_P1 compensation cell code selection This bit selects the code to be applied for the XSPIM_P1 I/O compensation cell.

pub const fn octo2_comp_en(&self) -> bool

XSPIM_P2 compensation cell enable Set this bit to enable the XSPIM_P2 compensation cell.

pub fn set_octo2_comp_en(&mut self, val: bool)

XSPIM_P2 compensation cell enable Set this bit to enable the XSPIM_P2 compensation cell.

pub const fn octo2_comp_codesel(&self) -> bool

XSPIM_P2 compensation cell code selection This bit selects the code to be applied for the XSPIM_P2 I/O compensation cell.

pub fn set_octo2_comp_codesel(&mut self, val: bool)

XSPIM_P2 compensation cell code selection This bit selects the code to be applied for the XSPIM_P2 I/O compensation cell.

pub const fn comp_rdy(&self) -> bool

Compensation cell ready This bit provides the status of the compensation cell.

pub fn set_comp_rdy(&mut self, val: bool)

Compensation cell ready This bit provides the status of the compensation cell.

pub const fn octo1_comp_rdy(&self) -> bool

XSPIM_P1 compensation cell ready This bit provides the status of the XSPIM_P1 compensation cell.

pub fn set_octo1_comp_rdy(&mut self, val: bool)

XSPIM_P1 compensation cell ready This bit provides the status of the XSPIM_P1 compensation cell.

pub const fn octo2_comp_rdy(&self) -> bool

XSPIM_P2 compensation cell ready This bit provides the status of the XSPIM_P2 compensation cell.

pub fn set_octo2_comp_rdy(&mut self, val: bool)

XSPIM_P2 compensation cell ready This bit provides the status of the XSPIM_P2 compensation cell.

pub const fn iohslv(&self) -> bool

I/O high speed at low voltage When this bit is set, the speed of the I/Os is optimized when the device voltage is low. This bit is active only if VDDIO_HSLV user option bit is set in FLASH. It must be used only if the device supply voltage is below 2.7 V. Setting this bit when V_DD is higher than 2.7 V may be destructive.

pub fn set_iohslv(&mut self, val: bool)

I/O high speed at low voltage When this bit is set, the speed of the I/Os is optimized when the device voltage is low. This bit is active only if VDDIO_HSLV user option bit is set in FLASH. It must be used only if the device supply voltage is below 2.7 V. Setting this bit when V_DD is higher than 2.7 V may be destructive.

pub const fn octo1_iohslv(&self) -> bool

XSPIM_P1 I/O high speed at low voltage When this bit is set, the speed of the XSPIM_P1 I/Os is optimized when the device voltage is low. This bit is active only if OCTO1_HSLV user option bit is set in FLASH. This bit must be used only if the device supply voltage is below 2.7 V. Setting this bit when V_DD is higher than 2.7 V may be destructive.

pub fn set_octo1_iohslv(&mut self, val: bool)

XSPIM_P1 I/O high speed at low voltage When this bit is set, the speed of the XSPIM_P1 I/Os is optimized when the device voltage is low. This bit is active only if OCTO1_HSLV user option bit is set in FLASH. This bit must be used only if the device supply voltage is below 2.7 V. Setting this bit when V_DD is higher than 2.7 V may be destructive.

pub const fn octo2_iohslv(&self) -> bool

XSPIM_P2 I/O high speed at low voltage When this bit is set, the speed of the XSPIM_P2 I/Os is optimized when the device voltage is low. This bit is active only if OCTO2_HSLV user option bit is set in FLASH. This bit must be used only if the device supply voltage is below 2.7 V. Setting this bit when V_DD is higher than 2.7 V may be destructive.

pub fn set_octo2_iohslv(&mut self, val: bool)

XSPIM_P2 I/O high speed at low voltage When this bit is set, the speed of the XSPIM_P2 I/Os is optimized when the device voltage is low. This bit is active only if OCTO2_HSLV user option bit is set in FLASH. This bit must be used only if the device supply voltage is below 2.7 V. Setting this bit when V_DD is higher than 2.7 V may be destructive.

Trait Implementations

impl Clone for Cccsr

fn clone(&self) -> Cccsr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Cccsr

fn default() -> Cccsr

Returns the “default value” for a type.

impl PartialEq for Cccsr

fn eq(&self, other: &Cccsr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Cccsr

impl Eq for Cccsr

impl StructuralPartialEq for Cccsr