Struct stm32_metapac::flash::regs::Optisr

#[repr(transparent)]
pub struct Optisr(pub u32);

Expand description

FLASH options interrupt status register.

Tuple Fields§

§0: u32

Implementations§

§

impl Optisr

pub const fn kvef(&self) -> bool

Key valid error flag This bit is set when loading an unknown or corrupted option byte key. More specifically: Embedded Flash did not find an option byte key that corresponds to the given OBKINDEX[4:0] and the requested HDPL (optionally modified by NEXTKL[1:0]). It can happen for example when requested key has not being provisioned. A double error detection was found when loading the requested option byte key. In this case, if this key is provisioned again the error should disappear. When KVEF is set write to START bit in FLASH_OBKCR is ignored. An interrupt is generated when this flag is raised if the KVEIE bit of FLASH_OPTCR register is set. Setting KVEF bit of register FLASH_OPTICR clears this bit.

pub fn set_kvef(&mut self, val: bool)

Key valid error flag This bit is set when loading an unknown or corrupted option byte key. More specifically: Embedded Flash did not find an option byte key that corresponds to the given OBKINDEX[4:0] and the requested HDPL (optionally modified by NEXTKL[1:0]). It can happen for example when requested key has not being provisioned. A double error detection was found when loading the requested option byte key. In this case, if this key is provisioned again the error should disappear. When KVEF is set write to START bit in FLASH_OBKCR is ignored. An interrupt is generated when this flag is raised if the KVEIE bit of FLASH_OPTCR register is set. Setting KVEF bit of register FLASH_OPTICR clears this bit.

pub const fn ktef(&self) -> bool

Key transfer error flag This bit is set when embedded Flash signals an error to the SAES peripheral. It happens when the key size (128-bit or 256-bit) is not matching between embedded Flash OBKSIZE[1:0] and KEYSIZE bit in SAES_CR register. It also happen when an ECC dual error detection occurred while embedded Flash loaded an option byte key for the SAES peripheral. When KTEF is set write to START bit in FLASH_OBKCR is ignored. An interrupt is generated when this flag is raised if the KTEIE bit of FLASH_OPTCR register is set. Setting KTEF bit of register FLASH_OPTICR clears this bit.

pub fn set_ktef(&mut self, val: bool)

Key transfer error flag This bit is set when embedded Flash signals an error to the SAES peripheral. It happens when the key size (128-bit or 256-bit) is not matching between embedded Flash OBKSIZE[1:0] and KEYSIZE bit in SAES_CR register. It also happen when an ECC dual error detection occurred while embedded Flash loaded an option byte key for the SAES peripheral. When KTEF is set write to START bit in FLASH_OBKCR is ignored. An interrupt is generated when this flag is raised if the KTEIE bit of FLASH_OPTCR register is set. Setting KTEF bit of register FLASH_OPTICR clears this bit.

pub const fn opterrf(&self) -> bool

Option byte change error flag When OPTERRF is set, the option byte change operation did not successfully complete. An interrupt is generated when this flag is raised if the OPTERRIE bit of FLASH_OPTCR register is set. Setting OPTERRF of register FLASH_OPTICR clears this bit.

pub fn set_opterrf(&mut self, val: bool)

Option byte change error flag When OPTERRF is set, the option byte change operation did not successfully complete. An interrupt is generated when this flag is raised if the OPTERRIE bit of FLASH_OPTCR register is set. Setting OPTERRF of register FLASH_OPTICR clears this bit.