Struct stm32_metapac::rcc::regs::Apb1lpenr1

#[repr(transparent)]
pub struct Apb1lpenr1(pub u32);

RCC APB1 low-power clock enable register 1.

Tuple Fields

0: u32

Implementations

impl Apb1lpenr1

pub const fn tim2lpen(&self) -> bool

TIM2 peripheral clock enable in low-power mode Set and reset by software.

pub fn set_tim2lpen(&mut self, val: bool)

TIM2 peripheral clock enable in low-power mode Set and reset by software.

pub const fn tim3lpen(&self) -> bool

TIM3 peripheral clock enable in low-power mode Set and reset by software.

pub fn set_tim3lpen(&mut self, val: bool)

TIM3 peripheral clock enable in low-power mode Set and reset by software.

pub const fn tim4lpen(&self) -> bool

TIM4 peripheral clock enable in low-power mode Set and reset by software.

pub fn set_tim4lpen(&mut self, val: bool)

TIM4 peripheral clock enable in low-power mode Set and reset by software.

pub const fn tim5lpen(&self) -> bool

TIM5 peripheral clock enable in low-power mode Set and reset by software.

pub fn set_tim5lpen(&mut self, val: bool)

TIM5 peripheral clock enable in low-power mode Set and reset by software.

pub const fn tim6lpen(&self) -> bool

TIM6 peripheral clock enable in low-power mode Set and reset by software.

pub fn set_tim6lpen(&mut self, val: bool)

TIM6 peripheral clock enable in low-power mode Set and reset by software.

pub const fn tim7lpen(&self) -> bool

TIM7 peripheral clock enable in low-power mode Set and reset by software.

pub fn set_tim7lpen(&mut self, val: bool)

TIM7 peripheral clock enable in low-power mode Set and reset by software.

pub const fn tim12lpen(&self) -> bool

TIM12 peripheral clock enable in low-power mode Set and reset by software.

pub fn set_tim12lpen(&mut self, val: bool)

TIM12 peripheral clock enable in low-power mode Set and reset by software.

pub const fn tim13lpen(&self) -> bool

TIM13 peripheral clock enable in low-power mode Set and reset by software.

pub fn set_tim13lpen(&mut self, val: bool)

TIM13 peripheral clock enable in low-power mode Set and reset by software.

pub const fn tim14lpen(&self) -> bool

TIM14 peripheral clock enable in low-power mode Set and reset by software.

pub fn set_tim14lpen(&mut self, val: bool)

TIM14 peripheral clock enable in low-power mode Set and reset by software.

pub const fn lptim1lpen(&self) -> bool

LPTIM1 peripheral clocks enable in low-power mode Set and reset by software.

pub fn set_lptim1lpen(&mut self, val: bool)

LPTIM1 peripheral clocks enable in low-power mode Set and reset by software.

pub const fn wwdglpen(&self) -> bool

WWDG clock enable in low-power mode Set and reset by software.

pub fn set_wwdglpen(&mut self, val: bool)

WWDG clock enable in low-power mode Set and reset by software.

pub const fn spi2lpen(&self) -> bool

SPI2 peripheral clocks enable in low-power mode Set and reset by software.

pub fn set_spi2lpen(&mut self, val: bool)

SPI2 peripheral clocks enable in low-power mode Set and reset by software.

pub const fn spi3lpen(&self) -> bool

SPI3 peripheral clocks enable in low-power mode Set and reset by software.

pub fn set_spi3lpen(&mut self, val: bool)

SPI3 peripheral clocks enable in low-power mode Set and reset by software.

pub const fn spdifrxlpen(&self) -> bool

SPDIFRX peripheral clocks enable in low-power mode Set and reset by software.

pub fn set_spdifrxlpen(&mut self, val: bool)

SPDIFRX peripheral clocks enable in low-power mode Set and reset by software.

pub const fn usart2lpen(&self) -> bool

USART2 peripheral clocks enable in low-power mode Set and reset by software.

pub fn set_usart2lpen(&mut self, val: bool)

USART2 peripheral clocks enable in low-power mode Set and reset by software.

pub const fn usart3lpen(&self) -> bool

USART3 peripheral clocks enable in low-power mode Set and reset by software.

pub fn set_usart3lpen(&mut self, val: bool)

USART3 peripheral clocks enable in low-power mode Set and reset by software.

pub const fn uart4lpen(&self) -> bool

UART4 peripheral clocks enable in low-power mode Set and reset by software.

pub fn set_uart4lpen(&mut self, val: bool)

UART4 peripheral clocks enable in low-power mode Set and reset by software.

pub const fn uart5lpen(&self) -> bool

UART5 peripheral clocks enable in low-power mode Set and reset by software.

pub fn set_uart5lpen(&mut self, val: bool)

UART5 peripheral clocks enable in low-power mode Set and reset by software.

pub const fn i2c1_i3c1lpen(&self) -> bool

I2C1/I3C1 peripheral clocks enable in low-power mode Set and reset by software.

pub fn set_i2c1_i3c1lpen(&mut self, val: bool)

I2C1/I3C1 peripheral clocks enable in low-power mode Set and reset by software.

pub const fn i2c2lpen(&self) -> bool

I2C2 peripheral clocks enable in low-power mode Set and reset by software.

pub fn set_i2c2lpen(&mut self, val: bool)

I2C2 peripheral clocks enable in low-power mode Set and reset by software.

pub const fn i2c3lpen(&self) -> bool

I2C3 peripheral clocks enable in low-power mode Set and reset by software.

pub fn set_i2c3lpen(&mut self, val: bool)

I2C3 peripheral clocks enable in low-power mode Set and reset by software.

pub const fn ceclpen(&self) -> bool

HDMI-CEC peripheral clocks enable in low-power mode Set and reset by software.

pub fn set_ceclpen(&mut self, val: bool)

HDMI-CEC peripheral clocks enable in low-power mode Set and reset by software.

pub const fn uart7lpen(&self) -> bool

UART7 peripheral clocks enable in low-power mode Set and reset by software.

pub fn set_uart7lpen(&mut self, val: bool)

UART7 peripheral clocks enable in low-power mode Set and reset by software.

pub const fn uart8lpen(&self) -> bool

UART8 peripheral clocks enable in low-power mode Set and reset by software.

pub fn set_uart8lpen(&mut self, val: bool)

UART8 peripheral clocks enable in low-power mode Set and reset by software.

Trait Implementations

impl Clone for Apb1lpenr1

fn clone(&self) -> Apb1lpenr1

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Apb1lpenr1

fn default() -> Apb1lpenr1

Returns the “default value” for a type.

impl PartialEq for Apb1lpenr1

fn eq(&self, other: &Apb1lpenr1) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Apb1lpenr1

impl Eq for Apb1lpenr1

impl StructuralPartialEq for Apb1lpenr1