Struct stm32_metapac::rcc::regs::Apb4enr

#[repr(transparent)]
pub struct Apb4enr(pub u32);

RCC APB4 clock enable register.

Tuple Fields

0: u32

Implementations

impl Apb4enr

pub const fn syscfgen(&self) -> bool

SBS peripheral clock enable Set and reset by software.

pub fn set_syscfgen(&mut self, val: bool)

SBS peripheral clock enable Set and reset by software.

pub const fn lpuart1en(&self) -> bool

LPUART1 peripheral clocks enable Set and reset by software. The peripheral clocks of the LPUART1 are the kernel clock selected by LPUART1SEL and provided to UCLK input, and the pclk4 bus interface clock.

pub fn set_lpuart1en(&mut self, val: bool)

LPUART1 peripheral clocks enable Set and reset by software. The peripheral clocks of the LPUART1 are the kernel clock selected by LPUART1SEL and provided to UCLK input, and the pclk4 bus interface clock.

pub const fn spi6en(&self) -> bool

SPI/I2S6 peripheral clocks enable Set and reset by software. The peripheral clocks of the SPI/I2S6 are the kernel clock selected by SPI6SEL and provided to com_clk input, and the pclk4 bus interface clock.

pub fn set_spi6en(&mut self, val: bool)

SPI/I2S6 peripheral clocks enable Set and reset by software. The peripheral clocks of the SPI/I2S6 are the kernel clock selected by SPI6SEL and provided to com_clk input, and the pclk4 bus interface clock.

pub const fn lptim2en(&self) -> bool

LPTIM2 peripheral clocks enable Set and reset by software. The LPTIM2 kernel clock can be selected by LPTIM23SEL.

pub fn set_lptim2en(&mut self, val: bool)

LPTIM2 peripheral clocks enable Set and reset by software. The LPTIM2 kernel clock can be selected by LPTIM23SEL.

pub const fn lptim3en(&self) -> bool

LPTIM3 peripheral clocks enable Set and reset by software. The LPTIM3 kernel clock can be selected by LPTIM23SEL.

pub fn set_lptim3en(&mut self, val: bool)

LPTIM3 peripheral clocks enable Set and reset by software. The LPTIM3 kernel clock can be selected by LPTIM23SEL.

pub const fn lptim4en(&self) -> bool

LPTIM4 peripheral clocks enable Set and reset by software. The LPTIM4 kernel clock can be selected by LPTIM45SEL.

pub fn set_lptim4en(&mut self, val: bool)

LPTIM4 peripheral clocks enable Set and reset by software. The LPTIM4 kernel clock can be selected by LPTIM45SEL.

pub const fn lptim5en(&self) -> bool

LPTIM5 peripheral clocks enable Set and reset by software. The LPTIM5 kernel clock can be selected by LPTIM45SEL.

pub fn set_lptim5en(&mut self, val: bool)

LPTIM5 peripheral clocks enable Set and reset by software. The LPTIM5 kernel clock can be selected by LPTIM45SEL.

pub const fn vrefen(&self) -> bool

VREF peripheral clock enable Set and reset by software.

pub fn set_vrefen(&mut self, val: bool)

VREF peripheral clock enable Set and reset by software.

pub const fn rtcapben(&self) -> bool

RTC APB clock enable Set and reset by software.

pub fn set_rtcapben(&mut self, val: bool)

RTC APB clock enable Set and reset by software.

pub const fn tmpsensen(&self) -> bool

Temperature Sensor peripheral clock enable Set and reset by software.

pub fn set_tmpsensen(&mut self, val: bool)

Temperature Sensor peripheral clock enable Set and reset by software.

Trait Implementations

impl Clone for Apb4enr

fn clone(&self) -> Apb4enr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Apb4enr

fn default() -> Apb4enr

Returns the “default value” for a type.

impl PartialEq for Apb4enr

fn eq(&self, other: &Apb4enr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Apb4enr

impl Eq for Apb4enr

impl StructuralPartialEq for Apb4enr