Struct stm32_metapac::rcc::regs::Apb1perckselr

#[repr(transparent)]
pub struct Apb1perckselr(pub u32);

RCC APB1 peripherals kernel clock selection register.

Tuple Fields

0: u32

Implementations

impl Apb1perckselr

pub const fn usart234578sel(&self) -> Usart234578sel

USART2,3, UART4,5,7,8 (APB1) kernel clock source selection Set and reset by software. others: reserved, the kernel clock is disabled.

pub fn set_usart234578sel(&mut self, val: Usart234578sel)

USART2,3, UART4,5,7,8 (APB1) kernel clock source selection Set and reset by software. others: reserved, the kernel clock is disabled.

pub const fn spi23sel(&self) -> Spi123sel

SPI/I2S2 and SPI/I2S3 kernel clock source selection Set and reset by software. If the selected clock is the external clock and this clock is stopped, it is not be possible to switch to another clock. Refer to Clock switches and gating on page 437 for additional information. others: reserved, the kernel clock is disabled Note: I2S_CKIN is an external clock taken from a pin.

pub fn set_spi23sel(&mut self, val: Spi123sel)

SPI/I2S2 and SPI/I2S3 kernel clock source selection Set and reset by software. If the selected clock is the external clock and this clock is stopped, it is not be possible to switch to another clock. Refer to Clock switches and gating on page 437 for additional information. others: reserved, the kernel clock is disabled Note: I2S_CKIN is an external clock taken from a pin.

pub const fn i2c23sel(&self) -> I2csel

I2C2, I2C3 kernel clock source selection Set and reset by software.

pub fn set_i2c23sel(&mut self, val: I2csel)

I2C2, I2C3 kernel clock source selection Set and reset by software.

pub const fn i2c1_i3c1sel(&self) -> I2c1I3c1sel

I2C1 or I3C1 kernel clock source selection Set and reset by software.

pub fn set_i2c1_i3c1sel(&mut self, val: I2c1I3c1sel)

I2C1 or I3C1 kernel clock source selection Set and reset by software.

pub const fn lptim1sel(&self) -> Lptim1sel

LPTIM1 kernel clock source selection Set and reset by software. others: reserved, the kernel clock is disabled.

pub fn set_lptim1sel(&mut self, val: Lptim1sel)

LPTIM1 kernel clock source selection Set and reset by software. others: reserved, the kernel clock is disabled.

pub const fn fdcansel(&self) -> Fdcansel

FDCAN kernel clock source selection.

pub fn set_fdcansel(&mut self, val: Fdcansel)

FDCAN kernel clock source selection.

pub const fn spdifrxsel(&self) -> Spdifrxsel

SPDIFRX kernel clock source selection.

pub fn set_spdifrxsel(&mut self, val: Spdifrxsel)

SPDIFRX kernel clock source selection.

pub const fn cecsel(&self) -> Cecsel

HDMI-CEC kernel clock source selection Set and reset by software.

pub fn set_cecsel(&mut self, val: Cecsel)

HDMI-CEC kernel clock source selection Set and reset by software.

Trait Implementations

impl Clone for Apb1perckselr

fn clone(&self) -> Apb1perckselr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Apb1perckselr

fn default() -> Apb1perckselr

Returns the “default value” for a type.

impl PartialEq for Apb1perckselr

fn eq(&self, other: &Apb1perckselr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Apb1perckselr

impl Eq for Apb1perckselr

impl StructuralPartialEq for Apb1perckselr