Struct stm32_metapac::rcc::regs::Apb2lpenr

#[repr(transparent)]
pub struct Apb2lpenr(pub u32);

Expand description

RCC APB2 low-power clock enable register.

Tuple Fields§

§0: u32

Implementations§

§

impl Apb2lpenr

pub const fn tim1lpen(&self) -> bool

TIM1 peripheral clock enable in low-power mode Set and reset by software.

pub fn set_tim1lpen(&mut self, val: bool)

TIM1 peripheral clock enable in low-power mode Set and reset by software.

pub const fn usart1lpen(&self) -> bool

USART1 peripheral clock enable in low-power mode Set and reset by software. The peripheral clocks of the USART1 are the kernel clock selected by USART169SEL and provided to UCLK inputs, and the pclk2 bus interface clock.

pub fn set_usart1lpen(&mut self, val: bool)

USART1 peripheral clock enable in low-power mode Set and reset by software. The peripheral clocks of the USART1 are the kernel clock selected by USART169SEL and provided to UCLK inputs, and the pclk2 bus interface clock.

pub const fn spi1lpen(&self) -> bool

SPI2S1 peripheral clock enable in low-power mode Set and reset by software. The peripheral clocks of the SPI2S1 are: the kernel clock selected by I2S1SEL and provided to spi_ker_ck input, and the pclk2 bus interface clock.

pub fn set_spi1lpen(&mut self, val: bool)

SPI2S1 peripheral clock enable in low-power mode Set and reset by software. The peripheral clocks of the SPI2S1 are: the kernel clock selected by I2S1SEL and provided to spi_ker_ck input, and the pclk2 bus interface clock.

pub const fn spi4lpen(&self) -> bool

SPI4 peripheral clock enable in low-power mode Set and reset by software. The peripheral clocks of the SPI4 are: the kernel clock selected by SPI45SEL and provided to com_clk input, and the pclk2 bus interface clock.

pub fn set_spi4lpen(&mut self, val: bool)

SPI4 peripheral clock enable in low-power mode Set and reset by software. The peripheral clocks of the SPI4 are: the kernel clock selected by SPI45SEL and provided to com_clk input, and the pclk2 bus interface clock.

pub const fn tim15lpen(&self) -> bool

TIM15 peripheral clock enable in low-power mode Set and reset by software.

pub fn set_tim15lpen(&mut self, val: bool)

TIM15 peripheral clock enable in low-power mode Set and reset by software.

pub const fn tim16lpen(&self) -> bool

TIM16 peripheral clock enable in low-power mode Set and reset by software.

pub fn set_tim16lpen(&mut self, val: bool)

TIM16 peripheral clock enable in low-power mode Set and reset by software.

pub const fn tim17lpen(&self) -> bool

TIM17 peripheral clock enable in low-power mode Set and reset by software.

pub fn set_tim17lpen(&mut self, val: bool)

TIM17 peripheral clock enable in low-power mode Set and reset by software.

pub const fn tim9lpen(&self) -> bool

TIM9 peripheral clock enable in low-power mode Set and reset by software.

pub fn set_tim9lpen(&mut self, val: bool)

TIM9 peripheral clock enable in low-power mode Set and reset by software.

pub const fn spi5lpen(&self) -> bool

SPI5 peripheral clocks enable in low-power mode Set and reset by software. The peripheral clocks of the SPI5 are the kernel clock selected by SPI45SEL and provided to com_clk input, and the pclk2 bus interface clock.

pub fn set_spi5lpen(&mut self, val: bool)

SPI5 peripheral clocks enable in low-power mode Set and reset by software. The peripheral clocks of the SPI5 are the kernel clock selected by SPI45SEL and provided to com_clk input, and the pclk2 bus interface clock.

pub const fn sai1lpen(&self) -> bool

SAI1 peripheral clocks enable in low-power mode Set and reset by software. The peripheral clocks of the SAI1 are: the kernel clock selected by SAI1SEL and provided to SAI_CK_A and SAI_CK_B inputs, and the pclk2 bus interface clock.

pub fn set_sai1lpen(&mut self, val: bool)

SAI1 peripheral clocks enable in low-power mode Set and reset by software. The peripheral clocks of the SAI1 are: the kernel clock selected by SAI1SEL and provided to SAI_CK_A and SAI_CK_B inputs, and the pclk2 bus interface clock.

pub const fn sai2lpen(&self) -> bool

SAI2 peripheral clocks enable in low-power mode Set and reset by software. The peripheral clocks of the SAI2 are: the kernel clock selected by SAI2SEL and provided to SAI_CK_A and SAI_CK_B inputs, and the pclk2 bus interface clock.

pub fn set_sai2lpen(&mut self, val: bool)

SAI2 peripheral clocks enable in low-power mode Set and reset by software. The peripheral clocks of the SAI2 are: the kernel clock selected by SAI2SEL and provided to SAI_CK_A and SAI_CK_B inputs, and the pclk2 bus interface clock.