Struct stm32_metapac::iwdg::regs::Ewcr

#[repr(transparent)]
pub struct Ewcr(pub u32);

Expand description

IWDG early wakeup interrupt register.

Tuple Fields§

§0: u32

Implementations§

§

impl Ewcr

pub const fn ewit(&self) -> u16

Watchdog counter window value These bits are write access protected (see ). They are written by software to define at which position of the IWDCNT down-counter the early wakeup interrupt must be generated. The early interrupt is generated when the IWDCNT is lower or equal to EWIT[11:0]

1. EWIT[11:0] must be bigger than 1. An interrupt is generated only if EWIE = 1. The EWU bit in the must be reset to be able to change the reload value. Note: Reading this register returns the Early wakeup comparator value and the Interrupt enable bit from the VDD voltage domain. This value may not be up to date/valid if a write operation to this register is ongoing, hence the value read from this register is valid only when the EWU bit in the is reset.

pub fn set_ewit(&mut self, val: u16)

Watchdog counter window value These bits are write access protected (see ). They are written by software to define at which position of the IWDCNT down-counter the early wakeup interrupt must be generated. The early interrupt is generated when the IWDCNT is lower or equal to EWIT[11:0]

1. EWIT[11:0] must be bigger than 1. An interrupt is generated only if EWIE = 1. The EWU bit in the must be reset to be able to change the reload value. Note: Reading this register returns the Early wakeup comparator value and the Interrupt enable bit from the VDD voltage domain. This value may not be up to date/valid if a write operation to this register is ongoing, hence the value read from this register is valid only when the EWU bit in the is reset.

pub const fn ewic(&self) -> bool

Watchdog early interrupt acknowledge The software must write a 1 into this bit in order to acknowledge the early wakeup interrupt and to clear the EWIF flag. Writing 0 has not effect, reading this flag returns a 0.

pub fn set_ewic(&mut self, val: bool)

Watchdog early interrupt acknowledge The software must write a 1 into this bit in order to acknowledge the early wakeup interrupt and to clear the EWIF flag. Writing 0 has not effect, reading this flag returns a 0.