Struct stm32_metapac::dma2d::regs::Cr

#[repr(transparent)]
pub struct Cr(pub u32);

DMA2D control register

Tuple Fields

0: u32

Implementations

impl Cr

pub const fn start(&self) -> CrStart

Start This bit can be used to launch the DMA2D according to the parameters loaded in the various configuration registers

pub fn set_start(&mut self, val: CrStart)

Start This bit can be used to launch the DMA2D according to the parameters loaded in the various configuration registers

pub const fn susp(&self) -> bool

Suspend This bit can be used to suspend the current transfer. This bit is set and reset by software. It is automatically reset by hardware when the START bit is reset.

pub fn set_susp(&mut self, val: bool)

Suspend This bit can be used to suspend the current transfer. This bit is set and reset by software. It is automatically reset by hardware when the START bit is reset.

pub const fn abort(&self) -> Abort

Abort This bit can be used to abort the current transfer. This bit is set by software and is automatically reset by hardware when the START bit is reset.

pub fn set_abort(&mut self, val: Abort)

Abort This bit can be used to abort the current transfer. This bit is set by software and is automatically reset by hardware when the START bit is reset.

pub const fn teie(&self) -> bool

Transfer error interrupt enable This bit is set and cleared by software.

pub fn set_teie(&mut self, val: bool)

Transfer error interrupt enable This bit is set and cleared by software.

pub const fn tcie(&self) -> bool

Transfer complete interrupt enable This bit is set and cleared by software.

pub fn set_tcie(&mut self, val: bool)

Transfer complete interrupt enable This bit is set and cleared by software.

pub const fn twie(&self) -> bool

Transfer watermark interrupt enable This bit is set and cleared by software.

pub fn set_twie(&mut self, val: bool)

Transfer watermark interrupt enable This bit is set and cleared by software.

pub const fn caeie(&self) -> bool

CLUT access error interrupt enable This bit is set and cleared by software.

pub fn set_caeie(&mut self, val: bool)

CLUT access error interrupt enable This bit is set and cleared by software.

pub const fn ctcie(&self) -> bool

CLUT transfer complete interrupt enable This bit is set and cleared by software.

pub fn set_ctcie(&mut self, val: bool)

CLUT transfer complete interrupt enable This bit is set and cleared by software.

pub const fn ceie(&self) -> bool

Configuration Error Interrupt Enable This bit is set and cleared by software.

pub fn set_ceie(&mut self, val: bool)

Configuration Error Interrupt Enable This bit is set and cleared by software.

pub const fn mode(&self) -> Mode

DMA2D mode This bit is set and cleared by software. It cannot be modified while a transfer is ongoing.

pub fn set_mode(&mut self, val: Mode)

DMA2D mode This bit is set and cleared by software. It cannot be modified while a transfer is ongoing.

Trait Implementations

impl Clone for Cr

fn clone(&self) -> Cr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Cr

fn default() -> Cr

Returns the “default value” for a type.

impl PartialEq for Cr

fn eq(&self, other: &Cr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Cr

impl Eq for Cr

impl StructuralEq for Cr

impl StructuralPartialEq for Cr