Struct stm32_metapac::dts::regs::Sr
#[repr(transparent)]pub struct Sr(pub u32);Expand description
Temperature sensor status register.
Tuple Fields§
§0: u32Implementations§
§impl Sr
impl Sr
pub const fn itef(&self) -> bool
pub const fn itef(&self) -> bool
Interrupt flag for end of measurement on temperature sensor 1, synchronized on PCLK. This bit is set by hardware when a temperature measure is done. It is cleared by software by writing 1 to the TS2_CITEF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_ITEFEN bit is set.
pub fn set_itef(&mut self, val: bool)
pub fn set_itef(&mut self, val: bool)
Interrupt flag for end of measurement on temperature sensor 1, synchronized on PCLK. This bit is set by hardware when a temperature measure is done. It is cleared by software by writing 1 to the TS2_CITEF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_ITEFEN bit is set.
pub const fn itlf(&self) -> bool
pub const fn itlf(&self) -> bool
Interrupt flag for low threshold on temperature sensor 1, synchronized on PCLK. This bit is set by hardware when the low threshold is set and reached. It is cleared by software by writing 1 to the TS1_CITLF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_ITLFEN bit is set.
pub fn set_itlf(&mut self, val: bool)
pub fn set_itlf(&mut self, val: bool)
Interrupt flag for low threshold on temperature sensor 1, synchronized on PCLK. This bit is set by hardware when the low threshold is set and reached. It is cleared by software by writing 1 to the TS1_CITLF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_ITLFEN bit is set.
pub const fn ithf(&self) -> bool
pub const fn ithf(&self) -> bool
Interrupt flag for high threshold on temperature sensor 1, synchronized on PCLK This bit is set by hardware when the high threshold is set and reached. It is cleared by software by writing 1 to the TS1_CITHF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_ITHFEN bit is set.
pub fn set_ithf(&mut self, val: bool)
pub fn set_ithf(&mut self, val: bool)
Interrupt flag for high threshold on temperature sensor 1, synchronized on PCLK This bit is set by hardware when the high threshold is set and reached. It is cleared by software by writing 1 to the TS1_CITHF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_ITHFEN bit is set.
pub const fn aitef(&self) -> bool
pub const fn aitef(&self) -> bool
Asynchronous interrupt flag for end of measure on temperature sensor 1 This bit is set by hardware when a temperature measure is done. It is cleared by software by writing 1 to the TS1_CAITEF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_AITEFEN bit is set.
pub fn set_aitef(&mut self, val: bool)
pub fn set_aitef(&mut self, val: bool)
Asynchronous interrupt flag for end of measure on temperature sensor 1 This bit is set by hardware when a temperature measure is done. It is cleared by software by writing 1 to the TS1_CAITEF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_AITEFEN bit is set.
pub const fn aitlf(&self) -> bool
pub const fn aitlf(&self) -> bool
Asynchronous interrupt flag for low threshold on temperature sensor 1 This bit is set by hardware when the low threshold is reached. It is cleared by software by writing 1 to the TS1_CAITLF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_AITLFEN bit is set.
pub fn set_aitlf(&mut self, val: bool)
pub fn set_aitlf(&mut self, val: bool)
Asynchronous interrupt flag for low threshold on temperature sensor 1 This bit is set by hardware when the low threshold is reached. It is cleared by software by writing 1 to the TS1_CAITLF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_AITLFEN bit is set.
pub const fn aithf(&self) -> bool
pub const fn aithf(&self) -> bool
Asynchronous interrupt flag for high threshold on temperature sensor 1 This bit is set by hardware when the high threshold is reached. It is cleared by software by writing 1 to the TS1_CAITHF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_AITHFEN bit is set.
pub fn set_aithf(&mut self, val: bool)
pub fn set_aithf(&mut self, val: bool)
Asynchronous interrupt flag for high threshold on temperature sensor 1 This bit is set by hardware when the high threshold is reached. It is cleared by software by writing 1 to the TS1_CAITHF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_AITHFEN bit is set.