Struct stm32_metapac::syscfg::regs::Pmcr
#[repr(transparent)]pub struct Pmcr(pub u32);Expand description
SBS product mode and configuration register.
Tuple Fields§
§0: u32Implementations§
§impl Pmcr
impl Pmcr
pub const fn fmplus_pb6(&self) -> bool
pub const fn fmplus_pb6(&self) -> bool
Fast-mode Plus on PB(6).
pub fn set_fmplus_pb6(&mut self, val: bool)
pub fn set_fmplus_pb6(&mut self, val: bool)
Fast-mode Plus on PB(6).
pub const fn fmplus_pb7(&self) -> bool
pub const fn fmplus_pb7(&self) -> bool
Fast-mode Plus on PB(7).
pub fn set_fmplus_pb7(&mut self, val: bool)
pub fn set_fmplus_pb7(&mut self, val: bool)
Fast-mode Plus on PB(7).
pub const fn fmplus_pb8(&self) -> bool
pub const fn fmplus_pb8(&self) -> bool
Fast-mode Plus on PB(8).
pub fn set_fmplus_pb8(&mut self, val: bool)
pub fn set_fmplus_pb8(&mut self, val: bool)
Fast-mode Plus on PB(8).
pub const fn fmplus_pb9(&self) -> bool
pub const fn fmplus_pb9(&self) -> bool
Fast-mode Plus on PB(9).
pub fn set_fmplus_pb9(&mut self, val: bool)
pub fn set_fmplus_pb9(&mut self, val: bool)
Fast-mode Plus on PB(9).
pub const fn boosten(&self) -> bool
pub const fn boosten(&self) -> bool
booster enable Set this bit to reduce the THD of the analog switches when the supply voltage is below 2.7 V. guaranteeing the same performance as with the full voltage range. To avoid current consumption due to booster activation when VDDA < 2.7 V and VDD > 2.7 V, VDD can be selected as supply voltage for analog switches by setting BOOSTVDDSEL bit in SBS_PMCR. In this case, the BOOSTEN bit must be cleared to avoid unwanted power consumption.
pub fn set_boosten(&mut self, val: bool)
pub fn set_boosten(&mut self, val: bool)
booster enable Set this bit to reduce the THD of the analog switches when the supply voltage is below 2.7 V. guaranteeing the same performance as with the full voltage range. To avoid current consumption due to booster activation when VDDA < 2.7 V and VDD > 2.7 V, VDD can be selected as supply voltage for analog switches by setting BOOSTVDDSEL bit in SBS_PMCR. In this case, the BOOSTEN bit must be cleared to avoid unwanted power consumption.
pub const fn boostvddsel(&self) -> bool
pub const fn boostvddsel(&self) -> bool
booster VDD selection This bit selects the analog switch supply voltage, between VDD, VDDA and booster. To avoid current consumption due to booster activation when VDDA < 2.7 V and VDD > 2.7 V, VDD can be selected as supply voltage for analog switches. In this case, the BOOSTEN bit must be cleared to avoid unwanted power consumption. When both VDD and VDDA are below 2.7 V, the booster is still needed to obtain full AC performances from the I/O analog switches.
pub fn set_boostvddsel(&mut self, val: bool)
pub fn set_boostvddsel(&mut self, val: bool)
booster VDD selection This bit selects the analog switch supply voltage, between VDD, VDDA and booster. To avoid current consumption due to booster activation when VDDA < 2.7 V and VDD > 2.7 V, VDD can be selected as supply voltage for analog switches. In this case, the BOOSTEN bit must be cleared to avoid unwanted power consumption. When both VDD and VDDA are below 2.7 V, the booster is still needed to obtain full AC performances from the I/O analog switches.
pub const fn eth_sel_phy(&self) -> EthSelPhy
pub const fn eth_sel_phy(&self) -> EthSelPhy
Ethernet PHY interface selection.
pub fn set_eth_sel_phy(&mut self, val: EthSelPhy)
pub fn set_eth_sel_phy(&mut self, val: EthSelPhy)
Ethernet PHY interface selection.
pub const fn axiram_ws(&self) -> AxiramWs
pub const fn axiram_ws(&self) -> AxiramWs
AXIRAM wait state Set this bit to add one wait state to all AXIRAMs when ECC = 0. When ECC = 1 there is one wait state by default.
pub fn set_axiram_ws(&mut self, val: AxiramWs)
pub fn set_axiram_ws(&mut self, val: AxiramWs)
AXIRAM wait state Set this bit to add one wait state to all AXIRAMs when ECC = 0. When ECC = 1 there is one wait state by default.