Struct stm32_metapac::rcc::Rcc

pub struct Rcc { /* private fields */ }

Reset and clock control

Implementations

impl Rcc

pub const unsafe fn from_ptr(ptr: *mut ()) -> Self

pub const fn as_ptr(&self) -> *mut ()

pub const fn cr(self) -> Reg<Cr, RW>

Clock control register

pub const fn icscr(self) -> Reg<Icscr, RW>

Internal clock sources calibration register

pub const fn cfgr(self) -> Reg<Cfgr, RW>

Clock configuration register

pub const fn pllcfgr(self) -> Reg<Pllcfgr, RW>

PLL configuration register

pub const fn pllsai1cfgr(self) -> Reg<Pllsaicfgr, RW>

PLLSAI1 configuration register

pub const fn pllsai2cfgr(self) -> Reg<Pllsaicfgr, RW>

PLLSAI2 configuration register

pub const fn cier(self) -> Reg<Cier, RW>

Clock interrupt enable register

pub const fn cifr(self) -> Reg<Cifr, R>

Clock interrupt flag register

pub const fn cicr(self) -> Reg<Cicr, W>

Clock interrupt clear register

pub const fn ahb1rstr(self) -> Reg<Ahb1rstr, RW>

AHB1 peripheral reset register

pub const fn ahb2rstr(self) -> Reg<Ahb2rstr, RW>

AHB2 peripheral reset register

pub const fn ahb3rstr(self) -> Reg<Ahb3rstr, RW>

AHB3 peripheral reset register

pub const fn apb1rstr1(self) -> Reg<Apb1rstr1, RW>

APB1 peripheral reset register 1

pub const fn apb1rstr2(self) -> Reg<Apb1rstr2, RW>

APB1 peripheral reset register 2

pub const fn apb2rstr(self) -> Reg<Apb2rstr, RW>

APB2 peripheral reset register

pub const fn ahb1enr(self) -> Reg<Ahb1enr, RW>

AHB1 peripheral clock enable register

pub const fn ahb2enr(self) -> Reg<Ahb2enr, RW>

AHB2 peripheral clock enable register

pub const fn ahb3enr(self) -> Reg<Ahb3enr, RW>

AHB3 peripheral clock enable register

pub const fn apb1enr1(self) -> Reg<Apb1enr1, RW>

APB1ENR1

pub const fn apb1enr2(self) -> Reg<Apb1enr2, RW>

APB1 peripheral clock enable register 2

pub const fn apb2enr(self) -> Reg<Apb2enr, RW>

APB2ENR

pub const fn ahb1smenr(self) -> Reg<Ahb1smenr, RW>

AHB1 peripheral clocks enable in Sleep and Stop modes register

pub const fn ahb2smenr(self) -> Reg<Ahb2smenr, RW>

AHB2 peripheral clocks enable in Sleep and Stop modes register

pub const fn ahb3smenr(self) -> Reg<Ahb3smenr, RW>

AHB3 peripheral clocks enable in Sleep and Stop modes register

pub const fn apb1smenr1(self) -> Reg<Apb1smenr1, RW>

APB1SMENR1

pub const fn apb1smenr2(self) -> Reg<Apb1smenr2, RW>

APB1 peripheral clocks enable in Sleep and Stop modes register 2

pub const fn apb2smenr(self) -> Reg<Apb2smenr, RW>

APB2SMENR

pub const fn ccipr(self) -> Reg<Ccipr, RW>

CCIPR

pub const fn bdcr(self) -> Reg<Bdcr, RW>

BDCR

pub const fn csr(self) -> Reg<Csr, RW>

CSR

pub const fn crrcr(self) -> Reg<Crrcr, RW>

Clock recovery RC register

pub const fn ccipr2(self) -> Reg<Ccipr2, RW>

Peripherals independent clock configuration register

pub const fn dlycfgr(self) -> Reg<Dlycfgr, RW>

delay configuration register

Trait Implementations

impl Clone for Rcc

fn clone(&self) -> Rcc

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl PartialEq for Rcc

fn eq(&self, other: &Rcc) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Rcc

impl Eq for Rcc

impl Send for Rcc

impl StructuralPartialEq for Rcc

impl Sync for Rcc