Enum stm32_metapac::octospi::vals::MemType

#[repr(u8)]
pub enum MemType {
    MICRON = 0,
    MACRONIX = 1,
    B_STANDARD = 2,
    MACRONIXRAM = 3,
    HYPERBUSMEMORY = 4,
    HYPERBUSREGISTER = 5,
    _RESERVED_6 = 6,
    _RESERVED_7 = 7,
}

Variants

MICRON = 0

Micron mode, D0/D1 ordering in DTR 8-data-bit mode. Regular-command protocol in Single-, Dual-, Quad- and Octal-SPI modes.

MACRONIX = 1

Macronix mode, D1/D0 ordering in DTR 8-data-bit mode. Regular-command protocol in Single-, Dual-, Quad- and Octal-SPI modes.

B_STANDARD = 2

Standard mode

MACRONIXRAM = 3

Macronix RAM mode, D1/D0 ordering in DTR 8-data-bit mode. Regular-command protocol in Single-, Dual-, Quad- and Octal-SPI modes with dedicated address mapping.

HYPERBUSMEMORY = 4

HyperBus memory mode, the protocol follows the HyperBus specification. 8-data-bit DTR mode must be selected.

HYPERBUSREGISTER = 5

HyperBus register mode, addressing register space. The memory-mapped accesses in. this mode must be non-cacheable, or Indirect read/write modes must be used.

_RESERVED_6 = 6

_RESERVED_7 = 7

Implementations

impl MemType

pub const fn from_bits(val: u8) -> MemType

pub const fn to_bits(self) -> u8

Trait Implementations

impl Clone for MemType

fn clone(&self) -> MemType

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl From<MemType> for u8

fn from(val: MemType) -> u8

Converts to this type from the input type.

impl From<u8> for MemType

fn from(val: u8) -> MemType

Converts to this type from the input type.

impl Ord for MemType

fn cmp(&self, other: &MemType) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl PartialEq for MemType

fn eq(&self, other: &MemType) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for MemType

fn partial_cmp(&self, other: &MemType) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Copy for MemType

impl Eq for MemType

impl StructuralEq for MemType

impl StructuralPartialEq for MemType