Struct stm32_metapac::pwr::regs::Pucrc

#[repr(transparent)]
pub struct Pucrc(pub u32);

Power Port C pull-up control register

Tuple Fields

0: u32

Implementations

impl Pucrc

pub const fn pu0(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu0(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu1(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu1(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu2(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu2(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu3(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu3(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu4(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu4(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu5(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu5(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu6(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu6(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu7(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu7(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu8(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu8(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu9(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu9(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu10(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu10(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu11(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu11(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu12(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu12(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu13(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu13(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu14(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu14(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu15(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu15(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

Trait Implementations

impl Clone for Pucrc

fn clone(&self) -> Pucrc

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Pucrc

fn default() -> Pucrc

Returns the “default value” for a type.

impl PartialEq for Pucrc

fn eq(&self, other: &Pucrc) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Pucrc

impl Eq for Pucrc

impl StructuralEq for Pucrc

impl StructuralPartialEq for Pucrc