Struct stm32_metapac::pwr::regs::Pdcra

#[repr(transparent)]
pub struct Pdcra(pub u32);

Power Port A pull-down control register

Tuple Fields

0: u32

Implementations

impl Pdcra

pub const fn pd0(&self) -> bool

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub fn set_pd0(&mut self, val: bool)

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub const fn pd1(&self) -> bool

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub fn set_pd1(&mut self, val: bool)

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub const fn pd2(&self) -> bool

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub fn set_pd2(&mut self, val: bool)

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub const fn pd3(&self) -> bool

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub fn set_pd3(&mut self, val: bool)

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub const fn pd4(&self) -> bool

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub fn set_pd4(&mut self, val: bool)

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub const fn pd5(&self) -> bool

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub fn set_pd5(&mut self, val: bool)

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub const fn pd6(&self) -> bool

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub fn set_pd6(&mut self, val: bool)

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub const fn pd7(&self) -> bool

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub fn set_pd7(&mut self, val: bool)

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub const fn pd8(&self) -> bool

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub fn set_pd8(&mut self, val: bool)

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub const fn pd9(&self) -> bool

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub fn set_pd9(&mut self, val: bool)

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub const fn pd10(&self) -> bool

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub fn set_pd10(&mut self, val: bool)

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub const fn pd11(&self) -> bool

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub fn set_pd11(&mut self, val: bool)

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub const fn pd12(&self) -> bool

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub fn set_pd12(&mut self, val: bool)

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub const fn pd13(&self) -> bool

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub fn set_pd13(&mut self, val: bool)

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub const fn pd14(&self) -> bool

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub fn set_pd14(&mut self, val: bool)

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub const fn pd15(&self) -> bool

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

pub fn set_pd15(&mut self, val: bool)

Port A pull-down bit y When set, this bit activates the pull-down on PA[y] when APC bit is set in PWR_CR3 register.

Trait Implementations

impl Clone for Pdcra

fn clone(&self) -> Pdcra

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Pdcra

fn default() -> Pdcra

Returns the “default value” for a type.

impl PartialEq for Pdcra

fn eq(&self, other: &Pdcra) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Pdcra

impl Eq for Pdcra

impl StructuralPartialEq for Pdcra