Struct stm32_metapac::lptim::regs::Icr

#[repr(transparent)]
pub struct Icr(pub u32);

LPTIM interrupt clear register.

Tuple Fields

0: u32

Implementations

impl Icr

pub const fn cccf(&self, n: usize) -> bool

Capture/compare 1 clear flag Writing 1 to this bit clears the CC1IF flag in the LPTIM_ISR register.

pub fn set_cccf(&mut self, n: usize, val: bool)

Capture/compare 1 clear flag Writing 1 to this bit clears the CC1IF flag in the LPTIM_ISR register.

pub const fn arrmcf(&self) -> bool

Autoreload match clear flag Writing 1 to this bit clears the ARRM flag in the LPTIM_ISR register.

pub fn set_arrmcf(&mut self, val: bool)

Autoreload match clear flag Writing 1 to this bit clears the ARRM flag in the LPTIM_ISR register.

pub const fn exttrigcf(&self) -> bool

External trigger valid edge clear flag Writing 1 to this bit clears the EXTTRIG flag in the LPTIM_ISR register.

pub fn set_exttrigcf(&mut self, val: bool)

External trigger valid edge clear flag Writing 1 to this bit clears the EXTTRIG flag in the LPTIM_ISR register.

pub const fn cmpokcf(&self, n: usize) -> bool

Compare register 1 update OK clear flag Writing 1 to this bit clears the CMP1OK flag in the LPTIM_ISR register.

pub fn set_cmpokcf(&mut self, n: usize, val: bool)

Compare register 1 update OK clear flag Writing 1 to this bit clears the CMP1OK flag in the LPTIM_ISR register.

pub const fn arrokcf(&self) -> bool

Autoreload register update OK clear flag Writing 1 to this bit clears the ARROK flag in the LPTIM_ISR register.

pub fn set_arrokcf(&mut self, val: bool)

Autoreload register update OK clear flag Writing 1 to this bit clears the ARROK flag in the LPTIM_ISR register.

pub const fn upcf(&self) -> bool

Direction change to UP clear flag Writing 1 to this bit clear the UP flag in the LPTIM_ISR register. Note: If the LPTIM does not support encoder mode feature, this bit is reserved. Please refer to.

pub fn set_upcf(&mut self, val: bool)

Direction change to UP clear flag Writing 1 to this bit clear the UP flag in the LPTIM_ISR register. Note: If the LPTIM does not support encoder mode feature, this bit is reserved. Please refer to.

pub const fn downcf(&self) -> bool

Direction change to down clear flag Writing 1 to this bit clear the DOWN flag in the LPTIM_ISR register. Note: If the LPTIM does not support encoder mode feature, this bit is reserved. Please refer to.

pub fn set_downcf(&mut self, val: bool)

Direction change to down clear flag Writing 1 to this bit clear the DOWN flag in the LPTIM_ISR register. Note: If the LPTIM does not support encoder mode feature, this bit is reserved. Please refer to.

pub const fn uecf(&self) -> bool

Update event clear flag Writing 1 to this bit clear the UE flag in the LPTIM_ISR register.

pub fn set_uecf(&mut self, val: bool)

Update event clear flag Writing 1 to this bit clear the UE flag in the LPTIM_ISR register.

pub const fn repokcf(&self) -> bool

Repetition register update OK clear flag Writing 1 to this bit clears the REPOK flag in the LPTIM_ISR register.

pub fn set_repokcf(&mut self, val: bool)

Repetition register update OK clear flag Writing 1 to this bit clears the REPOK flag in the LPTIM_ISR register.

pub const fn ccocf(&self, n: usize) -> bool

Capture/compare 1 over-capture clear flag Writing 1 to this bit clears the CC1OF flag in the LPTIM_ISR register. Note: If LPTIM does not implement at least 1 channel this bit is reserved. Please refer to.

pub fn set_ccocf(&mut self, n: usize, val: bool)

Capture/compare 1 over-capture clear flag Writing 1 to this bit clears the CC1OF flag in the LPTIM_ISR register. Note: If LPTIM does not implement at least 1 channel this bit is reserved. Please refer to.

pub const fn dierokcf(&self) -> bool

Interrupt enable register update OK clear flag Writing 1 to this bit clears the DIEROK flag in the LPTIM_ISR register.

pub fn set_dierokcf(&mut self, val: bool)

Interrupt enable register update OK clear flag Writing 1 to this bit clears the DIEROK flag in the LPTIM_ISR register.

Trait Implementations

impl Clone for Icr

fn clone(&self) -> Icr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Icr

fn default() -> Icr

Returns the “default value” for a type.

impl PartialEq for Icr

fn eq(&self, other: &Icr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Icr

impl Eq for Icr

impl StructuralPartialEq for Icr