Struct stm32_metapac::rcc::regs::Ccipr

#[repr(transparent)]
pub struct Ccipr(pub u32);

Peripherals independent clock configuration register.

Tuple Fields

0: u32

Implementations

impl Ccipr

pub const fn usart1sel(&self) -> Usart1sel

USART1 clock source selection This bitfield is controlled by software to select USART1 clock source as follows:.

pub fn set_usart1sel(&mut self, val: Usart1sel)

USART1 clock source selection This bitfield is controlled by software to select USART1 clock source as follows:.

pub const fn usart2sel(&self) -> Usart2sel

USART2 clock source selection This bitfield is controlled by software to select USART2 clock source as follows:.

pub fn set_usart2sel(&mut self, val: Usart2sel)

USART2 clock source selection This bitfield is controlled by software to select USART2 clock source as follows:.

pub const fn lpuart3sel(&self) -> Lpuart3sel

LPUART3 clock source selection⁽¹⁾ This bitfield is controlled by software to select LPUART3 clock source as follows:.

pub fn set_lpuart3sel(&mut self, val: Lpuart3sel)

LPUART3 clock source selection⁽¹⁾ This bitfield is controlled by software to select LPUART3 clock source as follows:.

pub const fn lpuart2sel(&self) -> Lpuart2sel

LPUART2 clock source selection This bitfield is controlled by software to select LPUART2 clock source as follows:.

pub fn set_lpuart2sel(&mut self, val: Lpuart2sel)

LPUART2 clock source selection This bitfield is controlled by software to select LPUART2 clock source as follows:.

pub const fn lpuart1sel(&self) -> Lpuart1sel

LPUART1 clock source selection This bitfield is controlled by software to select LPUART1 clock source as follows:.

pub fn set_lpuart1sel(&mut self, val: Lpuart1sel)

LPUART1 clock source selection This bitfield is controlled by software to select LPUART1 clock source as follows:.

pub const fn i2c1sel(&self) -> I2c1sel

I2C1 clock source selection This bitfield is controlled by software to select I2C1 clock source as follows:.

pub fn set_i2c1sel(&mut self, val: I2c1sel)

I2C1 clock source selection This bitfield is controlled by software to select I2C1 clock source as follows:.

pub const fn i2c3sel(&self) -> I2c3sel

I2C3 clock source selection This bitfield is controlled by software to select I2C3 clock source as follows:.

pub fn set_i2c3sel(&mut self, val: I2c3sel)

I2C3 clock source selection This bitfield is controlled by software to select I2C3 clock source as follows:.

pub const fn lptim1sel(&self) -> Lptim1sel

LPTIM1 clock source selection This bitfield is controlled by software to select LPTIM1 clock source as follows:.

pub fn set_lptim1sel(&mut self, val: Lptim1sel)

LPTIM1 clock source selection This bitfield is controlled by software to select LPTIM1 clock source as follows:.

pub const fn lptim2sel(&self) -> Lptim2sel

LPTIM2 clock source selection This bitfield is controlled by software to select LPTIM2 clock source as follows:.

pub fn set_lptim2sel(&mut self, val: Lptim2sel)

LPTIM2 clock source selection This bitfield is controlled by software to select LPTIM2 clock source as follows:.

pub const fn lptim3sel(&self) -> Lptim3sel

LPTIM3 clock source selection This bitfield is controlled by software to select LPTIM3 clock source as follows:.

pub fn set_lptim3sel(&mut self, val: Lptim3sel)

LPTIM3 clock source selection This bitfield is controlled by software to select LPTIM3 clock source as follows:.

pub const fn tim1sel(&self) -> Tim1sel

TIM1 clock source selection This bit is set and cleared by software. It selects TIM1 clock source as follows:.

pub fn set_tim1sel(&mut self, val: Tim1sel)

TIM1 clock source selection This bit is set and cleared by software. It selects TIM1 clock source as follows:.

pub const fn tim15sel(&self) -> Tim15sel

TIM15 clock source selection This bit is set and cleared by software. It selects TIM15 clock source as follows:.

pub fn set_tim15sel(&mut self, val: Tim15sel)

TIM15 clock source selection This bit is set and cleared by software. It selects TIM15 clock source as follows:.

pub const fn clk48sel(&self) -> Clk48sel

481MHz clock source selection This bitfield is controlled by software to select the 481MHz clock source used by the USB FS and the RNG:.

pub fn set_clk48sel(&mut self, val: Clk48sel)

481MHz clock source selection This bitfield is controlled by software to select the 481MHz clock source used by the USB FS and the RNG:.

pub const fn adcsel(&self) -> Adcsel

ADCs clock source selection This bitfield is controlled by software to select the clock source for ADC:.

pub fn set_adcsel(&mut self, val: Adcsel)

ADCs clock source selection This bitfield is controlled by software to select the clock source for ADC:.

Trait Implementations

impl Clone for Ccipr

fn clone(&self) -> Ccipr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Ccipr

fn default() -> Ccipr

Returns the “default value” for a type.

impl PartialEq for Ccipr

fn eq(&self, other: &Ccipr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Ccipr

impl Eq for Ccipr

impl StructuralPartialEq for Ccipr