Struct stm32_metapac::pwr::regs::Pucrd
#[repr(transparent)]pub struct Pucrd(pub u32);
Expand description
Power Port D pull-up control register
Tuple Fields§
§0: u32
Implementations§
§impl Pucrd
impl Pucrd
pub const fn pu0(&self) -> bool
pub const fn pu0(&self) -> bool
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.
pub fn set_pu0(&mut self, val: bool)
pub fn set_pu0(&mut self, val: bool)
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.
pub const fn pu1(&self) -> bool
pub const fn pu1(&self) -> bool
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.
pub fn set_pu1(&mut self, val: bool)
pub fn set_pu1(&mut self, val: bool)
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.
pub const fn pu2(&self) -> bool
pub const fn pu2(&self) -> bool
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.
pub fn set_pu2(&mut self, val: bool)
pub fn set_pu2(&mut self, val: bool)
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.
pub const fn pu3(&self) -> bool
pub const fn pu3(&self) -> bool
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.
pub fn set_pu3(&mut self, val: bool)
pub fn set_pu3(&mut self, val: bool)
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.
pub const fn pu4(&self) -> bool
pub const fn pu4(&self) -> bool
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.
pub fn set_pu4(&mut self, val: bool)
pub fn set_pu4(&mut self, val: bool)
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.
pub const fn pu5(&self) -> bool
pub const fn pu5(&self) -> bool
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.
pub fn set_pu5(&mut self, val: bool)
pub fn set_pu5(&mut self, val: bool)
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.
pub const fn pu6(&self) -> bool
pub const fn pu6(&self) -> bool
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.
pub fn set_pu6(&mut self, val: bool)
pub fn set_pu6(&mut self, val: bool)
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.
pub const fn pu8(&self) -> bool
pub const fn pu8(&self) -> bool
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.
pub fn set_pu8(&mut self, val: bool)
pub fn set_pu8(&mut self, val: bool)
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.
pub const fn pu9(&self) -> bool
pub const fn pu9(&self) -> bool
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.
pub fn set_pu9(&mut self, val: bool)
pub fn set_pu9(&mut self, val: bool)
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.
pub const fn pu10(&self) -> bool
pub const fn pu10(&self) -> bool
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.
pub fn set_pu10(&mut self, val: bool)
pub fn set_pu10(&mut self, val: bool)
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.
pub const fn pu11(&self) -> bool
pub const fn pu11(&self) -> bool
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.
pub fn set_pu11(&mut self, val: bool)
pub fn set_pu11(&mut self, val: bool)
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.
pub const fn pu12(&self) -> bool
pub const fn pu12(&self) -> bool
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.
pub fn set_pu12(&mut self, val: bool)
pub fn set_pu12(&mut self, val: bool)
Port D pull-up bit y When set, this bit activates the pull-up on PD[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.