Struct stm32_metapac::pwr::regs::Sr1

#[repr(transparent)]
pub struct Sr1(pub u32);

Expand description

Power status register 1

Tuple Fields§

§0: u32

Implementations§

§

impl Sr1

pub const fn wuf1(&self) -> bool

Wake-up flag 1 This bit is set when a wake-up event is detected on wake-up pin, WKUP1. It is cleared by writing 1 in the CWUF1 bit of the PWR_SCR register.

pub fn set_wuf1(&mut self, val: bool)

Wake-up flag 1 This bit is set when a wake-up event is detected on wake-up pin, WKUP1. It is cleared by writing 1 in the CWUF1 bit of the PWR_SCR register.

pub const fn wuf2(&self) -> bool

Wake-up flag 2 This bit is set when a wake-up event is detected on wake-up pin, WKUP2. It is cleared by writing 1 in the CWUF2 bit of the PWR_SCR register.

pub fn set_wuf2(&mut self, val: bool)

Wake-up flag 2 This bit is set when a wake-up event is detected on wake-up pin, WKUP2. It is cleared by writing 1 in the CWUF2 bit of the PWR_SCR register.

pub const fn wuf3(&self) -> bool

Wake-up flag 3 This bit is set when a wake-up event is detected on wake-up pin, WKUP3. It is cleared by writing 1 in the CWUF3 bit of the PWR_SCR register.

pub fn set_wuf3(&mut self, val: bool)

Wake-up flag 3 This bit is set when a wake-up event is detected on wake-up pin, WKUP3. It is cleared by writing 1 in the CWUF3 bit of the PWR_SCR register.

pub const fn wuf4(&self) -> bool

Wake-up flag 4 This bit is set when a wake-up event is detected on wake-up pin,WKUP4. It is cleared by writing 1 in the CWUF4 bit of the PWR_SCR register.

pub fn set_wuf4(&mut self, val: bool)

Wake-up flag 4 This bit is set when a wake-up event is detected on wake-up pin,WKUP4. It is cleared by writing 1 in the CWUF4 bit of the PWR_SCR register.

pub const fn wuf5(&self) -> bool

Wake-up flag 5 This bit is set when a wake-up event is detected on wake-up pin, WKUP5. It is cleared by writing 1 in the CWUF5 bit of the PWR_SCR register.

pub fn set_wuf5(&mut self, val: bool)

Wake-up flag 5 This bit is set when a wake-up event is detected on wake-up pin, WKUP5. It is cleared by writing 1 in the CWUF5 bit of the PWR_SCR register.

pub const fn wuf7(&self) -> bool

Wake-up flag 7 This bit is set when a wake-up event is detected on wake-up pin, WKUP7. It is cleared by writing 1 in the CWUF7 bit of the PWR_SCR register.

pub fn set_wuf7(&mut self, val: bool)

Wake-up flag 7 This bit is set when a wake-up event is detected on wake-up pin, WKUP7. It is cleared by writing 1 in the CWUF7 bit of the PWR_SCR register.

pub const fn sbf(&self) -> bool

Standby flag This bit is set by hardware when the device enters the Standby mode and is cleared by setting the CSBF bit in the PWR_SCR register, or by a power-on reset. It is not cleared by the system reset.

pub fn set_sbf(&mut self, val: bool)

Standby flag This bit is set by hardware when the device enters the Standby mode and is cleared by setting the CSBF bit in the PWR_SCR register, or by a power-on reset. It is not cleared by the system reset.

pub const fn stopf(&self) -> Stopf

Stop Flags These bits are set by hardware when the device enters any stop mode and are cleared by setting the CSBF bit in the PWR_SCR register, or by a power-on reset. It is not cleared by the system reset.

pub fn set_stopf(&mut self, val: Stopf)

Stop Flags These bits are set by hardware when the device enters any stop mode and are cleared by setting the CSBF bit in the PWR_SCR register, or by a power-on reset. It is not cleared by the system reset.

pub const fn wufi(&self) -> bool

Wake-up flag internal This bit is set when a wake-up is detected on the internal wake-up line. It is cleared when all internal wake-up sources are cleared.

pub fn set_wufi(&mut self, val: bool)

Wake-up flag internal This bit is set when a wake-up is detected on the internal wake-up line. It is cleared when all internal wake-up sources are cleared.