Enum stm32_metapac::adf::vals::Snthr

#[repr(u8)]
pub enum Snthr {
    NOISEPLUS3_5 = 0,
    NOISEPLUS6_0 = 1,
    NOISEPLUS9_5 = 2,
    NOISEPLUS12 = 3,
    NOISEPLUS15_6 = 4,
    NOISEPLUS18 = 5,
    NOISEPLUS21_6 = 6,
    NOISEPLUS24_1 = 7,
    NOISEPLUS27_6 = 8,
    NOISEPLUS30_1 = 9,
    _RESERVED_a = 10,
    _RESERVED_b = 11,
    _RESERVED_c = 12,
    _RESERVED_d = 13,
    _RESERVED_e = 14,
    _RESERVED_f = 15,
}

SNTHR. This bitfield is set and cleared by software. It is used to select the gain to be applied at CIC output. If the application attempts to write a new gain value while the previous one is not yet applied, this new gain value is ignored. Reading back this bitfield informs the application on the current gain value.

Variants

NOISEPLUS3_5 = 0

Threshold is 3.5 dB higher than ANLVL

NOISEPLUS6_0 = 1

Threshold is 6.0 dB higher than ANLVL

NOISEPLUS9_5 = 2

Threshold is 9.5 dB higher than ANLVL

NOISEPLUS12 = 3

Threshold is 12 dB higher than ANLVL

NOISEPLUS15_6 = 4

Threshold is 15.6 dB higher than ANLVL

NOISEPLUS18 = 5

Threshold is 18 dB higher than ANLVL

NOISEPLUS21_6 = 6

Threshold is 21.6 dB higher than ANLVL

NOISEPLUS24_1 = 7

Threshold is 24.1 dB higher than ANLVL

NOISEPLUS27_6 = 8

Threshold is 27.6 dB higher than ANLVL

NOISEPLUS30_1 = 9

Threshold is 30.1 dB higher than ANLVL

_RESERVED_a = 10

_RESERVED_b = 11

_RESERVED_c = 12

_RESERVED_d = 13

_RESERVED_e = 14

_RESERVED_f = 15

Implementations

impl Snthr

pub const fn from_bits(val: u8) -> Snthr

pub const fn to_bits(self) -> u8

Trait Implementations

impl Clone for Snthr

fn clone(&self) -> Snthr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl From<Snthr> for u8

fn from(val: Snthr) -> u8

Converts to this type from the input type.

impl From<u8> for Snthr

fn from(val: u8) -> Snthr

Converts to this type from the input type.

impl Ord for Snthr

fn cmp(&self, other: &Snthr) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl PartialEq for Snthr

fn eq(&self, other: &Snthr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for Snthr

fn partial_cmp(&self, other: &Snthr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Copy for Snthr

impl Eq for Snthr

impl StructuralEq for Snthr

impl StructuralPartialEq for Snthr