Struct stm32_metapac::flash::regs::Optr

#[repr(transparent)]
pub struct Optr(pub u32);

FLASH option register

Tuple Fields

0: u32

Implementations

impl Optr

pub const fn rdp(&self) -> Rdp

Readout protection level Others: Level 1 (memories readout protection active) Note: Refer to for more details.

pub fn set_rdp(&mut self, val: Rdp)

Readout protection level Others: Level 1 (memories readout protection active) Note: Refer to for more details.

pub const fn bor_lev(&self) -> BorLev

BOR reset level These bits contain the VDD supply level threshold that activates/releases the reset.

pub fn set_bor_lev(&mut self, val: BorLev)

BOR reset level These bits contain the VDD supply level threshold that activates/releases the reset.

pub const fn n_rst_stop(&self) -> NRstStop

Reset generation in Stop mode

pub fn set_n_rst_stop(&mut self, val: NRstStop)

Reset generation in Stop mode

pub const fn n_rst_stdby(&self) -> NRstStdby

Reset generation in Standby mode

pub fn set_n_rst_stdby(&mut self, val: NRstStdby)

Reset generation in Standby mode

pub const fn n_rst_shdw(&self) -> NRstShdw

Reset generation in Shutdown mode

pub fn set_n_rst_shdw(&mut self, val: NRstShdw)

Reset generation in Shutdown mode

pub const fn sram1345_rst(&self) -> bool

SRAM1, SRAM3 and SRAM4 erase upon system reset

pub fn set_sram1345_rst(&mut self, val: bool)

SRAM1, SRAM3 and SRAM4 erase upon system reset

pub const fn iwdg_sw(&self) -> IwdgSw

Independent watchdog selection

pub fn set_iwdg_sw(&mut self, val: IwdgSw)

Independent watchdog selection

pub const fn iwdg_stop(&self) -> IwdgStop

Independent watchdog counter freeze in Stop mode

pub fn set_iwdg_stop(&mut self, val: IwdgStop)

Independent watchdog counter freeze in Stop mode

pub const fn iwdg_stdby(&self) -> IwdgStdby

Independent watchdog counter freeze in Standby mode

pub fn set_iwdg_stdby(&mut self, val: IwdgStdby)

Independent watchdog counter freeze in Standby mode

pub const fn wwdg_sw(&self) -> WwdgSw

Window watchdog selection

pub fn set_wwdg_sw(&mut self, val: WwdgSw)

Window watchdog selection

pub const fn swap_bank(&self) -> SwapBank

Swap banks

pub fn set_swap_bank(&mut self, val: SwapBank)

Swap banks

pub const fn dualbank(&self) -> Dualbank

Dual-bank on 1-Mbyte and 512-Kbyte Flash memory devices

pub fn set_dualbank(&mut self, val: Dualbank)

Dual-bank on 1-Mbyte and 512-Kbyte Flash memory devices

pub const fn bkpsram_ecc(&self) -> BkpsramEcc

Backup RAM ECC detection and correction enable

pub fn set_bkpsram_ecc(&mut self, val: BkpsramEcc)

Backup RAM ECC detection and correction enable

pub const fn sram3_ecc(&self) -> SramEcc

SRAM3 ECC detection and correction enable

pub fn set_sram3_ecc(&mut self, val: SramEcc)

SRAM3 ECC detection and correction enable

pub const fn sram2_ecc(&self) -> SramEcc

SRAM2 ECC detection and correction enable

pub fn set_sram2_ecc(&mut self, val: SramEcc)

SRAM2 ECC detection and correction enable

pub const fn sram2_rst(&self) -> bool

SRAM2 erase when system reset

pub fn set_sram2_rst(&mut self, val: bool)

SRAM2 erase when system reset

pub const fn n_swboot0(&self) -> NSwboot

Software BOOT0

pub fn set_n_swboot0(&mut self, val: NSwboot)

Software BOOT0

pub const fn n_boot0(&self) -> NBoot

nBOOT0 option bit

pub fn set_n_boot0(&mut self, val: NBoot)

nBOOT0 option bit

pub const fn pa15_pupen(&self) -> bool

PA15 pull-up enable

pub fn set_pa15_pupen(&mut self, val: bool)

PA15 pull-up enable

pub const fn io_vdd_hslv(&self) -> IoVddHslv

High-speed IO at low VDD voltage configuration bit This bit can be set only with VDD below 2.5V

pub fn set_io_vdd_hslv(&mut self, val: IoVddHslv)

High-speed IO at low VDD voltage configuration bit This bit can be set only with VDD below 2.5V

pub const fn io_vddio2_hslv(&self) -> IoVddioHslv

High-speed IO at low VDDIO2 voltage configuration bit This bit can be set only with VDDIO2 below 2.5 V.

pub fn set_io_vddio2_hslv(&mut self, val: IoVddioHslv)

High-speed IO at low VDDIO2 voltage configuration bit This bit can be set only with VDDIO2 below 2.5 V.

pub const fn tzen(&self) -> bool

Global TrustZone security enable

pub fn set_tzen(&mut self, val: bool)

Global TrustZone security enable

Trait Implementations

impl Clone for Optr

fn clone(&self) -> Optr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Optr

fn default() -> Optr

Returns the “default value” for a type.

impl PartialEq for Optr

fn eq(&self, other: &Optr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Optr

impl Eq for Optr

impl StructuralEq for Optr

impl StructuralPartialEq for Optr