Struct stm32_metapac::pwr::regs::Wusr

#[repr(transparent)]
pub struct Wusr(pub u32);

wakeup status register

Tuple Fields

0: u32

Implementations

impl Wusr

pub const fn wuf1(&self) -> bool

Wakeup flag 1 This bit is set when a wakeup event is detected on WKUP1 pin. This bit is cleared by writing 1 in the CWUF1 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN1=0.

pub fn set_wuf1(&mut self, val: bool)

Wakeup flag 1 This bit is set when a wakeup event is detected on WKUP1 pin. This bit is cleared by writing 1 in the CWUF1 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN1=0.

pub const fn wuf2(&self) -> bool

Wakeup flag 2 This bit is set when a wakeup event is detected on WKUP2 pin. This bit is cleared by writing 1 in the CWUF2 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN2=0.

pub fn set_wuf2(&mut self, val: bool)

Wakeup flag 2 This bit is set when a wakeup event is detected on WKUP2 pin. This bit is cleared by writing 1 in the CWUF2 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN2=0.

pub const fn wuf3(&self) -> bool

Wakeup flag 3 This bit is set when a wakeup event is detected on WKUP3 pin. This bit is cleared by writing 1 in the CWUF3 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN3=0.

pub fn set_wuf3(&mut self, val: bool)

Wakeup flag 3 This bit is set when a wakeup event is detected on WKUP3 pin. This bit is cleared by writing 1 in the CWUF3 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN3=0.

pub const fn wuf4(&self) -> bool

Wakeup flag 4 This bit is set when a wakeup event is detected on WKUP4 pin. This bit is cleared by writing 1 in the CWUF4 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN4=0.

pub fn set_wuf4(&mut self, val: bool)

Wakeup flag 4 This bit is set when a wakeup event is detected on WKUP4 pin. This bit is cleared by writing 1 in the CWUF4 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN4=0.

pub const fn wuf5(&self) -> bool

Wakeup flag 5 This bit is set when a wakeup event is detected on WKUP5 pin. This bit is cleared by writing 1 in the CWUF5 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN5=0.

pub fn set_wuf5(&mut self, val: bool)

Wakeup flag 5 This bit is set when a wakeup event is detected on WKUP5 pin. This bit is cleared by writing 1 in the CWUF5 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN5=0.

pub const fn wuf6(&self) -> bool

Wakeup flag 6 This bit is set when a wakeup event is detected on WKUP6 pin. This bit is cleared by writing 1 in the CWUF6 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN6=0. If WUSEL=11, this bit is cleared by hardware when all internal wakeup source are cleared.

pub fn set_wuf6(&mut self, val: bool)

Wakeup flag 6 This bit is set when a wakeup event is detected on WKUP6 pin. This bit is cleared by writing 1 in the CWUF6 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN6=0. If WUSEL=11, this bit is cleared by hardware when all internal wakeup source are cleared.

pub const fn wuf7(&self) -> bool

Wakeup flag 7 This bit is set when a wakeup event is detected on WKUP7 pin. This bit is cleared by writing 1 in the CWUF7 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN7=0. If WUSEL=11, this bit is cleared by hardware when all internal wakeup source are cleared.

pub fn set_wuf7(&mut self, val: bool)

Wakeup flag 7 This bit is set when a wakeup event is detected on WKUP7 pin. This bit is cleared by writing 1 in the CWUF7 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN7=0. If WUSEL=11, this bit is cleared by hardware when all internal wakeup source are cleared.

pub const fn wuf8(&self) -> bool

Wakeup flag 8 This bit is set when a wakeup event is detected on WKUP8 pin. This bit is cleared by writing 1 in the CWUF8 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN8=0. If WUSEL=11, this bit is cleared by hardware when all internal wakeup source are cleared.

pub fn set_wuf8(&mut self, val: bool)

Wakeup flag 8 This bit is set when a wakeup event is detected on WKUP8 pin. This bit is cleared by writing 1 in the CWUF8 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN8=0. If WUSEL=11, this bit is cleared by hardware when all internal wakeup source are cleared.

Trait Implementations

impl Clone for Wusr

fn clone(&self) -> Wusr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Wusr

fn default() -> Wusr

Returns the “default value” for a type.

impl PartialEq for Wusr

fn eq(&self, other: &Wusr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Wusr

impl Eq for Wusr

impl StructuralEq for Wusr

impl StructuralPartialEq for Wusr