Struct stm32_metapac::rcc::regs::Srdamr

#[repr(transparent)]
pub struct Srdamr(pub u32);

RCC SmartRun domain peripheral autonomous mode register

Tuple Fields

0: u32

Implementations

impl Srdamr

pub const fn spi3amen(&self) -> bool

SPI3 autonomous mode enable in Stop 0,1, 2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub fn set_spi3amen(&mut self, val: bool)

SPI3 autonomous mode enable in Stop 0,1, 2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub const fn lpuart1amen(&self) -> bool

LPUART1 autonomous mode enable in Stop 0,1, 2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub fn set_lpuart1amen(&mut self, val: bool)

LPUART1 autonomous mode enable in Stop 0,1, 2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub const fn i2c3amen(&self) -> bool

I2C3 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub fn set_i2c3amen(&mut self, val: bool)

I2C3 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub const fn lptim1amen(&self) -> bool

LPTIM1 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub fn set_lptim1amen(&mut self, val: bool)

LPTIM1 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub const fn lptim3amen(&self) -> bool

LPTIM3 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub fn set_lptim3amen(&mut self, val: bool)

LPTIM3 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub const fn lptim4amen(&self) -> bool

LPTIM4 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub fn set_lptim4amen(&mut self, val: bool)

LPTIM4 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub const fn opampamen(&self) -> bool

OPAMP autonomous mode enable in Stop 0,1,2 mode Set and cleared by software.

pub fn set_opampamen(&mut self, val: bool)

OPAMP autonomous mode enable in Stop 0,1,2 mode Set and cleared by software.

pub const fn compamen(&self) -> bool

COMP autonomous mode enable in Stop 0,1,2 mode Set and cleared by software.

pub fn set_compamen(&mut self, val: bool)

COMP autonomous mode enable in Stop 0,1,2 mode Set and cleared by software.

pub const fn vrefamen(&self) -> bool

VREFBUF autonomous mode enable in Stop 0,1,2 mode Set and cleared by software.

pub fn set_vrefamen(&mut self, val: bool)

VREFBUF autonomous mode enable in Stop 0,1,2 mode Set and cleared by software.

pub const fn rtcapbamen(&self) -> bool

RTC and TAMP autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub fn set_rtcapbamen(&mut self, val: bool)

RTC and TAMP autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub const fn adc4amen(&self) -> bool

ADC4 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub fn set_adc4amen(&mut self, val: bool)

ADC4 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub const fn lpgpio1amen(&self) -> bool

LPGPIO1 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software.

pub fn set_lpgpio1amen(&mut self, val: bool)

LPGPIO1 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software.

pub const fn dac1amen(&self) -> bool

DAC1 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub fn set_dac1amen(&mut self, val: bool)

DAC1 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub const fn lpdma1amen(&self) -> bool

LPDMA1 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub fn set_lpdma1amen(&mut self, val: bool)

LPDMA1 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub const fn adf1amen(&self) -> bool

ADF1 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub fn set_adf1amen(&mut self, val: bool)

ADF1 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub const fn sram4amen(&self) -> bool

SRAM4 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software.

pub fn set_sram4amen(&mut self, val: bool)

SRAM4 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software.

Trait Implementations

impl Clone for Srdamr

fn clone(&self) -> Srdamr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Srdamr

fn default() -> Srdamr

Returns the “default value” for a type.

impl PartialEq for Srdamr

fn eq(&self, other: &Srdamr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Srdamr

impl Eq for Srdamr

impl StructuralEq for Srdamr

impl StructuralPartialEq for Srdamr