Struct stm32_metapac::pwr::regs::Wusr

#[repr(transparent)]
pub struct Wusr(pub u32);

Expand description

wakeup status register

Tuple Fields§

§0: u32

Implementations§

§

impl Wusr

pub const fn wuf1(&self) -> bool

Wakeup flag 1 This bit is set when a wakeup event is detected on WKUP1 pin. This bit is cleared by writing 1 in the CWUF1 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN1=0.

pub fn set_wuf1(&mut self, val: bool)

Wakeup flag 1 This bit is set when a wakeup event is detected on WKUP1 pin. This bit is cleared by writing 1 in the CWUF1 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN1=0.

pub const fn wuf2(&self) -> bool

Wakeup flag 2 This bit is set when a wakeup event is detected on WKUP2 pin. This bit is cleared by writing 1 in the CWUF2 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN2=0.

pub fn set_wuf2(&mut self, val: bool)

Wakeup flag 2 This bit is set when a wakeup event is detected on WKUP2 pin. This bit is cleared by writing 1 in the CWUF2 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN2=0.

pub const fn wuf3(&self) -> bool

Wakeup flag 3 This bit is set when a wakeup event is detected on WKUP3 pin. This bit is cleared by writing 1 in the CWUF3 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN3=0.

pub fn set_wuf3(&mut self, val: bool)

Wakeup flag 3 This bit is set when a wakeup event is detected on WKUP3 pin. This bit is cleared by writing 1 in the CWUF3 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN3=0.

pub const fn wuf4(&self) -> bool

Wakeup flag 4 This bit is set when a wakeup event is detected on WKUP4 pin. This bit is cleared by writing 1 in the CWUF4 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN4=0.

pub fn set_wuf4(&mut self, val: bool)

Wakeup flag 4 This bit is set when a wakeup event is detected on WKUP4 pin. This bit is cleared by writing 1 in the CWUF4 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN4=0.

pub const fn wuf5(&self) -> bool

Wakeup flag 5 This bit is set when a wakeup event is detected on WKUP5 pin. This bit is cleared by writing 1 in the CWUF5 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN5=0.

pub fn set_wuf5(&mut self, val: bool)

Wakeup flag 5 This bit is set when a wakeup event is detected on WKUP5 pin. This bit is cleared by writing 1 in the CWUF5 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN5=0.

pub const fn wuf6(&self) -> bool

Wakeup flag 6 This bit is set when a wakeup event is detected on WKUP6 pin. This bit is cleared by writing 1 in the CWUF6 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN6=0. If WUSEL=11, this bit is cleared by hardware when all internal wakeup source are cleared.

pub fn set_wuf6(&mut self, val: bool)

Wakeup flag 6 This bit is set when a wakeup event is detected on WKUP6 pin. This bit is cleared by writing 1 in the CWUF6 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN6=0. If WUSEL=11, this bit is cleared by hardware when all internal wakeup source are cleared.

pub const fn wuf7(&self) -> bool

Wakeup flag 7 This bit is set when a wakeup event is detected on WKUP7 pin. This bit is cleared by writing 1 in the CWUF7 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN7=0. If WUSEL=11, this bit is cleared by hardware when all internal wakeup source are cleared.

pub fn set_wuf7(&mut self, val: bool)

Wakeup flag 7 This bit is set when a wakeup event is detected on WKUP7 pin. This bit is cleared by writing 1 in the CWUF7 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN7=0. If WUSEL=11, this bit is cleared by hardware when all internal wakeup source are cleared.

pub const fn wuf8(&self) -> bool

Wakeup flag 8 This bit is set when a wakeup event is detected on WKUP8 pin. This bit is cleared by writing 1 in the CWUF8 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN8=0. If WUSEL=11, this bit is cleared by hardware when all internal wakeup source are cleared.

pub fn set_wuf8(&mut self, val: bool)

Wakeup flag 8 This bit is set when a wakeup event is detected on WKUP8 pin. This bit is cleared by writing 1 in the CWUF8 bit of WUSCR when WUSEL ≠ 11, or by hardware when WUPEN8=0. If WUSEL=11, this bit is cleared by hardware when all internal wakeup source are cleared.