Struct stm32_metapac::flash::regs::Nsbootadd1r

#[repr(transparent)]
pub struct Nsbootadd1r(pub u32);

FLASH non-secure boot address 1 register

Tuple Fields

0: u32

Implementations

impl Nsbootadd1r

pub const fn nsbootadd1(&self) -> u32

Non-secure boot address 1 The non-secure boot memory address can be programmed to any address in the valid address range with a granularity of 128 bytes. These bits correspond to address [31:7]. The NSBOOTADD0 option bytes are selected following the BOOT0 pin or nSWBOOT0 state. Examples: NSBOOTADD1[24:0] = 0x0100000: Boot from non-secure Flash memory (0x0800 0000) NSBOOTADD1[24:0] = 0x017F200: Boot from system memory bootloader (0x0BF9 0000) NSBOOTADD1[24:0] = 0x0400000: Boot from non-secure SRAM1 on S-Bus (0x2000 0000)

pub fn set_nsbootadd1(&mut self, val: u32)

Non-secure boot address 1 The non-secure boot memory address can be programmed to any address in the valid address range with a granularity of 128 bytes. These bits correspond to address [31:7]. The NSBOOTADD0 option bytes are selected following the BOOT0 pin or nSWBOOT0 state. Examples: NSBOOTADD1[24:0] = 0x0100000: Boot from non-secure Flash memory (0x0800 0000) NSBOOTADD1[24:0] = 0x017F200: Boot from system memory bootloader (0x0BF9 0000) NSBOOTADD1[24:0] = 0x0400000: Boot from non-secure SRAM1 on S-Bus (0x2000 0000)

Trait Implementations

impl Clone for Nsbootadd1r

fn clone(&self) -> Nsbootadd1r

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Nsbootadd1r

fn default() -> Nsbootadd1r

Returns the “default value” for a type.

impl PartialEq for Nsbootadd1r

fn eq(&self, other: &Nsbootadd1r) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Nsbootadd1r

impl Eq for Nsbootadd1r

impl StructuralPartialEq for Nsbootadd1r