Struct stm32_metapac::lptim::regs::IsrAdv

#[repr(transparent)]
pub struct IsrAdv(pub u32);

Expand description

LPTIM interrupt and status register.

Tuple Fields§

§0: u32

Implementations§

§

impl IsrAdv

pub const fn ccif(&self, n: usize) -> bool

Compare 1 interrupt flag The CC1IF flag is set by hardware to inform application that LPTIM_CNT register value matches the compare register’s value. The CC1IF flag can be cleared by writing 1 to the CC1CF bit in the LPTIM_ICR register.

pub fn set_ccif(&mut self, n: usize, val: bool)

Compare 1 interrupt flag The CC1IF flag is set by hardware to inform application that LPTIM_CNT register value matches the compare register’s value. The CC1IF flag can be cleared by writing 1 to the CC1CF bit in the LPTIM_ICR register.

pub const fn arrm(&self) -> bool

Autoreload match ARRM is set by hardware to inform application that LPTIM_CNT register’s value reached the LPTIM_ARR register’s value. ARRM flag can be cleared by writing 1 to the ARRMCF bit in the LPTIM_ICR register.

pub fn set_arrm(&mut self, val: bool)

Autoreload match ARRM is set by hardware to inform application that LPTIM_CNT register’s value reached the LPTIM_ARR register’s value. ARRM flag can be cleared by writing 1 to the ARRMCF bit in the LPTIM_ICR register.

pub const fn exttrig(&self) -> bool

External trigger edge event EXTTRIG is set by hardware to inform application that a valid edge on the selected external trigger input has occurred. If the trigger is ignored because the timer has already started, then this flag is not set. EXTTRIG flag can be cleared by writing 1 to the EXTTRIGCF bit in the LPTIM_ICR register.

pub fn set_exttrig(&mut self, val: bool)

External trigger edge event EXTTRIG is set by hardware to inform application that a valid edge on the selected external trigger input has occurred. If the trigger is ignored because the timer has already started, then this flag is not set. EXTTRIG flag can be cleared by writing 1 to the EXTTRIGCF bit in the LPTIM_ICR register.

pub const fn cmpok(&self, n: usize) -> bool

Compare register 1 update OK CMP1OK is set by hardware to inform application that the APB bus write operation to the LPTIM_CCR1 register has been successfully completed. CMP1OK flag can be cleared by writing 1 to the CMP1OKCF bit in the LPTIM_ICR register.

pub fn set_cmpok(&mut self, n: usize, val: bool)

Compare register 1 update OK CMP1OK is set by hardware to inform application that the APB bus write operation to the LPTIM_CCR1 register has been successfully completed. CMP1OK flag can be cleared by writing 1 to the CMP1OKCF bit in the LPTIM_ICR register.

pub const fn arrok(&self) -> bool

Autoreload register update OK ARROK is set by hardware to inform application that the APB bus write operation to the LPTIM_ARR register has been successfully completed. ARROK flag can be cleared by writing 1 to the ARROKCF bit in the LPTIM_ICR register.

pub fn set_arrok(&mut self, val: bool)

Autoreload register update OK ARROK is set by hardware to inform application that the APB bus write operation to the LPTIM_ARR register has been successfully completed. ARROK flag can be cleared by writing 1 to the ARROKCF bit in the LPTIM_ICR register.

pub const fn up(&self) -> bool

Counter direction change down to up In Encoder mode, UP bit is set by hardware to inform application that the counter direction has changed from down to up. UP flag can be cleared by writing 1 to the UPCF bit in the LPTIM_ICR register. Note: If the LPTIM does not support encoder mode feature, this bit is reserved. Please refer to.

pub fn set_up(&mut self, val: bool)

Counter direction change down to up In Encoder mode, UP bit is set by hardware to inform application that the counter direction has changed from down to up. UP flag can be cleared by writing 1 to the UPCF bit in the LPTIM_ICR register. Note: If the LPTIM does not support encoder mode feature, this bit is reserved. Please refer to.

pub const fn down(&self) -> bool

Counter direction change up to down In Encoder mode, DOWN bit is set by hardware to inform application that the counter direction has changed from up to down. DOWN flag can be cleared by writing 1 to the DOWNCF bit in the LPTIM_ICR register. Note: If the LPTIM does not support encoder mode feature, this bit is reserved. Please refer to.

pub fn set_down(&mut self, val: bool)

Counter direction change up to down In Encoder mode, DOWN bit is set by hardware to inform application that the counter direction has changed from up to down. DOWN flag can be cleared by writing 1 to the DOWNCF bit in the LPTIM_ICR register. Note: If the LPTIM does not support encoder mode feature, this bit is reserved. Please refer to.

pub const fn ue(&self) -> bool

LPTIM update event occurred UE is set by hardware to inform application that an update event was generated. UE flag can be cleared by writing 1 to the UECF bit in the LPTIM_ICR register.

pub fn set_ue(&mut self, val: bool)

LPTIM update event occurred UE is set by hardware to inform application that an update event was generated. UE flag can be cleared by writing 1 to the UECF bit in the LPTIM_ICR register.

pub const fn repok(&self) -> bool

Repetition register update OK REPOK is set by hardware to inform application that the APB bus write operation to the LPTIM_RCR register has been successfully completed. REPOK flag can be cleared by writing 1 to the REPOKCF bit in the LPTIM_ICR register.

pub fn set_repok(&mut self, val: bool)

Repetition register update OK REPOK is set by hardware to inform application that the APB bus write operation to the LPTIM_RCR register has been successfully completed. REPOK flag can be cleared by writing 1 to the REPOKCF bit in the LPTIM_ICR register.

pub const fn ccof(&self, n: usize) -> bool

Capture 1 over-capture flag This flag is set by hardware only when the corresponding channel is configured in input capture mode. It is cleared by software by writing 1 to the CC1OCF bit in the LPTIM_ICR register. Note: If LPTIM does not implement at least 1 channel this bit is reserved. Please refer to.

pub fn set_ccof(&mut self, n: usize, val: bool)

Capture 1 over-capture flag This flag is set by hardware only when the corresponding channel is configured in input capture mode. It is cleared by software by writing 1 to the CC1OCF bit in the LPTIM_ICR register. Note: If LPTIM does not implement at least 1 channel this bit is reserved. Please refer to.

pub const fn dierok(&self) -> bool

Interrupt enable register update OK DIEROK is set by hardware to inform application that the APB bus write operation to the LPTIM_DIER register has been successfully completed. DIEROK flag can be cleared by writing 1 to the DIEROKCF bit in the LPTIM_ICR register.

pub fn set_dierok(&mut self, val: bool)

Interrupt enable register update OK DIEROK is set by hardware to inform application that the APB bus write operation to the LPTIM_DIER register has been successfully completed. DIEROK flag can be cleared by writing 1 to the DIEROKCF bit in the LPTIM_ICR register.