Module regs
- Bsmxcr
- This register is used to select the bitstream to be provided to the corresponding digital filter and to the SCD.
- Ckgcr
- MDF clock generator control register.
- Dfltcicr
- This register is used to control the main CIC filter.
- Dfltcr
- This register is used to control the digital filter x.
- Dfltdr
- This register is used to read the data processed by each digital filter.
- Dfltier
- This register is used for allowing or not the events to generate an interrupt.
- Dfltintr
- This register is used to the integrator (INT) settings.
- Dfltisr
- MDF DFLT0 interrupt status register 0.
- Dfltrsfr
- This register is used to control the reshape and HPF filters.
- Dlycr
- This register is used for the adjustment stream delays.
- Gcr
- MDF global control register.
- Oeccr
- This register contains the offset compensation value.
- Oldcr
- This register is used to configure the Out-of Limit Detector function.
- Oldthhr
- This register is used for the adjustment of the Out-off Limit high threshold.
- Oldthlr
- This register is used for the adjustment of the Out-off Limit low threshold.
- Scdcr
- This register is used for the adjustment stream delays.
- Sitfcr
- This register is used to control the serial interfaces (SITFx).
- Snpsdr
- This register is used to read the data processed by each digital filter in snapshot mode.