Struct stm32_metapac::flash::regs::Acr

#[repr(transparent)]
pub struct Acr(pub u32);

FLASH access control register

Tuple Fields

0: u32

Implementations

impl Acr

pub const fn latency(&self) -> u8

Latency These bits represent the ratio between the HCLK (AHB clock) period and the Flash memory access time. …

pub fn set_latency(&mut self, val: u8)

Latency These bits represent the ratio between the HCLK (AHB clock) period and the Flash memory access time. …

pub const fn prften(&self) -> bool

Prefetch enable This bit enables the prefetch buffer in the embedded Flash memory.

pub fn set_prften(&mut self, val: bool)

Prefetch enable This bit enables the prefetch buffer in the embedded Flash memory.

pub const fn lpm(&self) -> Lpm

Low-power read mode This bit puts the Flash memory in low-power read mode.

pub fn set_lpm(&mut self, val: Lpm)

Low-power read mode This bit puts the Flash memory in low-power read mode.

pub const fn pdreq1(&self) -> Pdreq

Bank 1 power-down mode request This bit is write-protected with FLASH_PDKEY1R. This bit requests bank 1 to enter power-down mode. When bank 1 enters power-down mode, this bit is cleared by hardware and the PDKEY1R is locked.

pub fn set_pdreq1(&mut self, val: Pdreq)

Bank 1 power-down mode request This bit is write-protected with FLASH_PDKEY1R. This bit requests bank 1 to enter power-down mode. When bank 1 enters power-down mode, this bit is cleared by hardware and the PDKEY1R is locked.

pub const fn pdreq2(&self) -> Pdreq

Bank 2 power-down mode request This bit is write-protected with FLASH_PDKEY2R. This bit requests bank 2 to enter power-down mode. When bank 2 enters power-down mode, this bit is cleared by hardware and the PDKEY2R is locked.

pub fn set_pdreq2(&mut self, val: Pdreq)

Bank 2 power-down mode request This bit is write-protected with FLASH_PDKEY2R. This bit requests bank 2 to enter power-down mode. When bank 2 enters power-down mode, this bit is cleared by hardware and the PDKEY2R is locked.

pub const fn sleep_pd(&self) -> SleepPd

Flash memory power-down mode during Sleep mode This bit determines whether the Flash memory is in power-down mode or Idle mode when the device is in Sleep mode. The Flash must not be put in power-down while a program or an erase operation is on-going.

pub fn set_sleep_pd(&mut self, val: SleepPd)

Flash memory power-down mode during Sleep mode This bit determines whether the Flash memory is in power-down mode or Idle mode when the device is in Sleep mode. The Flash must not be put in power-down while a program or an erase operation is on-going.

Trait Implementations

impl Clone for Acr

fn clone(&self) -> Acr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Acr

fn default() -> Acr

Returns the “default value” for a type.

impl PartialEq for Acr

fn eq(&self, other: &Acr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Acr

impl Eq for Acr

impl StructuralPartialEq for Acr