Struct stm32_metapac::rcc::regs::Apb1rstr1

#[repr(transparent)]
pub struct Apb1rstr1(pub u32);

RCC APB1 peripheral reset register 1

Tuple Fields

0: u32

Implementations

impl Apb1rstr1

pub const fn tim2rst(&self) -> bool

TIM2 reset Set and cleared by software.

pub fn set_tim2rst(&mut self, val: bool)

TIM2 reset Set and cleared by software.

pub const fn tim3rst(&self) -> bool

TIM3 reset Set and cleared by software.

pub fn set_tim3rst(&mut self, val: bool)

TIM3 reset Set and cleared by software.

pub const fn tim4rst(&self) -> bool

TIM4 reset Set and cleared by software.

pub fn set_tim4rst(&mut self, val: bool)

TIM4 reset Set and cleared by software.

pub const fn tim5rst(&self) -> bool

TIM5 reset Set and cleared by software.

pub fn set_tim5rst(&mut self, val: bool)

TIM5 reset Set and cleared by software.

pub const fn tim6rst(&self) -> bool

TIM6 reset Set and cleared by software.

pub fn set_tim6rst(&mut self, val: bool)

TIM6 reset Set and cleared by software.

pub const fn tim7rst(&self) -> bool

TIM7 reset Set and cleared by software.

pub fn set_tim7rst(&mut self, val: bool)

TIM7 reset Set and cleared by software.

pub const fn spi2rst(&self) -> bool

SPI2 reset Set and cleared by software.

pub fn set_spi2rst(&mut self, val: bool)

SPI2 reset Set and cleared by software.

pub const fn usart2rst(&self) -> bool

USART2 reset Set and cleared by software.

pub fn set_usart2rst(&mut self, val: bool)

USART2 reset Set and cleared by software.

pub const fn usart3rst(&self) -> bool

USART3 reset Set and cleared by software.

pub fn set_usart3rst(&mut self, val: bool)

USART3 reset Set and cleared by software.

pub const fn uart4rst(&self) -> bool

UART4 reset Set and cleared by software.

pub fn set_uart4rst(&mut self, val: bool)

UART4 reset Set and cleared by software.

pub const fn uart5rst(&self) -> bool

UART5 reset Set and cleared by software.

pub fn set_uart5rst(&mut self, val: bool)

UART5 reset Set and cleared by software.

pub const fn i2c1rst(&self) -> bool

I2C1 reset Set and cleared by software.

pub fn set_i2c1rst(&mut self, val: bool)

I2C1 reset Set and cleared by software.

pub const fn i2c2rst(&self) -> bool

I2C2 reset Set and cleared by software.

pub fn set_i2c2rst(&mut self, val: bool)

I2C2 reset Set and cleared by software.

pub const fn crsrst(&self) -> bool

CRS reset Set and cleared by software.

pub fn set_crsrst(&mut self, val: bool)

CRS reset Set and cleared by software.

pub const fn usart6rst(&self) -> bool

USART6 reset This bit is set and cleared by software. Note: This bit is only available on some devices in the STM32U5 Series. Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value.

pub fn set_usart6rst(&mut self, val: bool)

USART6 reset This bit is set and cleared by software. Note: This bit is only available on some devices in the STM32U5 Series. Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value.

Trait Implementations

impl Clone for Apb1rstr1

fn clone(&self) -> Apb1rstr1

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Apb1rstr1

fn default() -> Apb1rstr1

Returns the “default value” for a type.

impl PartialEq for Apb1rstr1

fn eq(&self, other: &Apb1rstr1) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Apb1rstr1

impl Eq for Apb1rstr1

impl StructuralPartialEq for Apb1rstr1