Struct stm32_metapac::rcc::regs::Cifr

#[repr(transparent)]
pub struct Cifr(pub u32);

RCC clock interrupt flag register

Tuple Fields

0: u32

Implementations

impl Cifr

pub const fn lsirdyf(&self) -> bool

LSI ready interrupt flag Set by hardware when the LSI clock becomes stable and LSIRDYIE is set. Cleared by software setting the LSIRDYC bit.

pub fn set_lsirdyf(&mut self, val: bool)

LSI ready interrupt flag Set by hardware when the LSI clock becomes stable and LSIRDYIE is set. Cleared by software setting the LSIRDYC bit.

pub const fn lserdyf(&self) -> bool

LSE ready interrupt flag Set by hardware when the LSE clock becomes stable and LSERDYIE is set. Cleared by software setting the LSERDYC bit.

pub fn set_lserdyf(&mut self, val: bool)

LSE ready interrupt flag Set by hardware when the LSE clock becomes stable and LSERDYIE is set. Cleared by software setting the LSERDYC bit.

pub const fn msisrdyf(&self) -> bool

MSIS ready interrupt flag Set by hardware when the MSIS clock becomes stable and MSISRDYIE is set. Cleared by software setting the MSISRDYC bit.

pub fn set_msisrdyf(&mut self, val: bool)

MSIS ready interrupt flag Set by hardware when the MSIS clock becomes stable and MSISRDYIE is set. Cleared by software setting the MSISRDYC bit.

pub const fn hsirdyf(&self) -> bool

HSI ready interrupt flag Set by hardware when the HSI clock becomes stable and HSIRDYIE is set in a response to setting the HSION (see RCC_CR). When HSION is not set but the HSI oscillator is enabled by the peripheral through a clock request, this bit is not set and no interrupt is generated. Cleared by software setting the HSIRDYC bit.

pub fn set_hsirdyf(&mut self, val: bool)

HSI ready interrupt flag Set by hardware when the HSI clock becomes stable and HSIRDYIE is set in a response to setting the HSION (see RCC_CR). When HSION is not set but the HSI oscillator is enabled by the peripheral through a clock request, this bit is not set and no interrupt is generated. Cleared by software setting the HSIRDYC bit.

pub const fn hserdyf(&self) -> bool

HSE ready interrupt flag Set by hardware when the HSE clock becomes stable and HSERDYIE is set. Cleared by software setting the HSERDYC bit.

pub fn set_hserdyf(&mut self, val: bool)

HSE ready interrupt flag Set by hardware when the HSE clock becomes stable and HSERDYIE is set. Cleared by software setting the HSERDYC bit.

pub const fn hsi48rdyf(&self) -> bool

HSI48 ready interrupt flag Set by hardware when the HSI48 clock becomes stable and HSI48RDYIE is set. Cleared by software setting the HSI48RDYC bit.

pub fn set_hsi48rdyf(&mut self, val: bool)

HSI48 ready interrupt flag Set by hardware when the HSI48 clock becomes stable and HSI48RDYIE is set. Cleared by software setting the HSI48RDYC bit.

pub const fn pllrdyf(&self, n: usize) -> bool

PLL1 ready interrupt flag Set by hardware when the PLL1 locks and PLL1RDYIE is set. Cleared by software setting the PLL1RDYC bit.

pub fn set_pllrdyf(&mut self, n: usize, val: bool)

PLL1 ready interrupt flag Set by hardware when the PLL1 locks and PLL1RDYIE is set. Cleared by software setting the PLL1RDYC bit.

pub const fn cssf(&self) -> bool

Clock security system interrupt flag Set by hardware when a failure is detected in the HSE oscillator. Cleared by software setting the CSSC bit.

pub fn set_cssf(&mut self, val: bool)

Clock security system interrupt flag Set by hardware when a failure is detected in the HSE oscillator. Cleared by software setting the CSSC bit.

pub const fn msikrdyf(&self) -> bool

MSIK ready interrupt flag Set by hardware when the MSIK clock becomes stable and MSIKRDYIE is set. Cleared by software setting the MSIKRDYC bit.

pub fn set_msikrdyf(&mut self, val: bool)

MSIK ready interrupt flag Set by hardware when the MSIK clock becomes stable and MSIKRDYIE is set. Cleared by software setting the MSIKRDYC bit.

pub const fn shsirdyf(&self) -> bool

SHSI ready interrupt flag Set by hardware when the SHSI clock becomes stable and SHSIRDYIE is set. Cleared by software setting the SHSIRDYC bit.

pub fn set_shsirdyf(&mut self, val: bool)

SHSI ready interrupt flag Set by hardware when the SHSI clock becomes stable and SHSIRDYIE is set. Cleared by software setting the SHSIRDYC bit.

Trait Implementations

impl Clone for Cifr

fn clone(&self) -> Cifr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Cifr

fn default() -> Cifr

Returns the “default value” for a type.

impl PartialEq for Cifr

fn eq(&self, other: &Cifr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Cifr

impl Eq for Cifr

impl StructuralPartialEq for Cifr