Struct stm32_metapac::rcc::regs::Apb1rstr2

#[repr(transparent)]
pub struct Apb1rstr2(pub u32);

RCC APB1 peripheral reset register 2

Tuple Fields

0: u32

Implementations

impl Apb1rstr2

pub const fn i2c4rst(&self) -> bool

I2C4 reset Set and cleared by software

pub fn set_i2c4rst(&mut self, val: bool)

I2C4 reset Set and cleared by software

pub const fn lptim2rst(&self) -> bool

LPTIM2 reset Set and cleared by software.

pub fn set_lptim2rst(&mut self, val: bool)

LPTIM2 reset Set and cleared by software.

pub const fn i2c5rst(&self) -> bool

I2C5 reset This bit is set and cleared by software Note: This bit is only available on some devices in the STM32U5 Series. Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value.

pub fn set_i2c5rst(&mut self, val: bool)

I2C5 reset This bit is set and cleared by software Note: This bit is only available on some devices in the STM32U5 Series. Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value.

pub const fn i2c6rst(&self) -> bool

I2C6 reset This bit is set and cleared by software Note: This bit is only available on some devices in the STM32U5 Series. Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value.

pub fn set_i2c6rst(&mut self, val: bool)

I2C6 reset This bit is set and cleared by software Note: This bit is only available on some devices in the STM32U5 Series. Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value.

pub const fn fdcan1rst(&self) -> bool

FDCAN1 reset Set and cleared by software.

pub fn set_fdcan1rst(&mut self, val: bool)

FDCAN1 reset Set and cleared by software.

pub const fn ucpd1rst(&self) -> bool

UCPD1 reset Set and cleared by software.

pub fn set_ucpd1rst(&mut self, val: bool)

UCPD1 reset Set and cleared by software.

Trait Implementations

impl Clone for Apb1rstr2

fn clone(&self) -> Apb1rstr2

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Apb1rstr2

fn default() -> Apb1rstr2

Returns the “default value” for a type.

impl PartialEq for Apb1rstr2

fn eq(&self, other: &Apb1rstr2) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Apb1rstr2

impl Eq for Apb1rstr2

impl StructuralPartialEq for Apb1rstr2