Struct stm32_metapac::flash::regs::Eccr

#[repr(transparent)]
pub struct Eccr(pub u32);

FLASH ECC register

Tuple Fields

0: u32

Implementations

impl Eccr

pub const fn addr_ecc(&self) -> u32

ECC fail address

pub fn set_addr_ecc(&mut self, val: u32)

ECC fail address

pub const fn bk_ecc(&self) -> BkEcc

ECC fail bank

pub fn set_bk_ecc(&mut self, val: BkEcc)

ECC fail bank

pub const fn sysf_ecc(&self) -> bool

System Flash memory ECC fail This bit indicates that the ECC error correction or double ECC error detection is located in the system Flash memory.

pub fn set_sysf_ecc(&mut self, val: bool)

System Flash memory ECC fail This bit indicates that the ECC error correction or double ECC error detection is located in the system Flash memory.

pub const fn eccie(&self) -> Eccie

ECC correction interrupt enable This bit enables the interrupt generation when the ECCC bit in the FLASH_ECCR register is set.

pub fn set_eccie(&mut self, val: Eccie)

ECC correction interrupt enable This bit enables the interrupt generation when the ECCC bit in the FLASH_ECCR register is set.

pub const fn eccc(&self) -> bool

ECC correction This bit is set by hardware when one ECC error has been detected and corrected (only if ECCC and ECCD were previously cleared). An interrupt is generated if ECCIE is set. This bit is cleared by writing 1.

pub fn set_eccc(&mut self, val: bool)

ECC correction This bit is set by hardware when one ECC error has been detected and corrected (only if ECCC and ECCD were previously cleared). An interrupt is generated if ECCIE is set. This bit is cleared by writing 1.

pub const fn eccd(&self) -> bool

ECC detection This bit is set by hardware when two ECC errors have been detected (only if ECCC and ECCD were previously cleared). When this bit is set, a NMI is generated. This bit is cleared by writing 1.

pub fn set_eccd(&mut self, val: bool)

ECC detection This bit is set by hardware when two ECC errors have been detected (only if ECCC and ECCD were previously cleared). When this bit is set, a NMI is generated. This bit is cleared by writing 1.

Trait Implementations

impl Clone for Eccr

fn clone(&self) -> Eccr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Eccr

fn default() -> Eccr

Returns the “default value” for a type.

impl PartialEq for Eccr

fn eq(&self, other: &Eccr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Eccr

impl Eq for Eccr

impl StructuralPartialEq for Eccr