Struct stm32_metapac::flash::regs::Optr

#[repr(transparent)]
pub struct Optr(pub u32);

FLASH option register

Tuple Fields

0: u32

Implementations

impl Optr

pub const fn rdp(&self) -> Rdp

Readout protection level Others: Level 1 (memories readout protection active) Note: Refer to for more details.

pub fn set_rdp(&mut self, val: Rdp)

Readout protection level Others: Level 1 (memories readout protection active) Note: Refer to for more details.

pub const fn bor_lev(&self) -> BorLev

BOR reset level These bits contain the VDD supply level threshold that activates/releases the reset.

pub fn set_bor_lev(&mut self, val: BorLev)

BOR reset level These bits contain the VDD supply level threshold that activates/releases the reset.

pub const fn n_rst_stop(&self) -> NRstStop

Reset generation in Stop mode

pub fn set_n_rst_stop(&mut self, val: NRstStop)

Reset generation in Stop mode

pub const fn n_rst_stdby(&self) -> NRstStdby

Reset generation in Standby mode

pub fn set_n_rst_stdby(&mut self, val: NRstStdby)

Reset generation in Standby mode

pub const fn n_rst_shdw(&self) -> NRstShdw

Reset generation in Shutdown mode

pub fn set_n_rst_shdw(&mut self, val: NRstShdw)

Reset generation in Shutdown mode

pub const fn sram1345_rst(&self) -> bool

SRAM1, SRAM3 and SRAM4 erase upon system reset

pub fn set_sram1345_rst(&mut self, val: bool)

SRAM1, SRAM3 and SRAM4 erase upon system reset

pub const fn iwdg_sw(&self) -> IwdgSw

Independent watchdog selection

pub fn set_iwdg_sw(&mut self, val: IwdgSw)

Independent watchdog selection

pub const fn iwdg_stop(&self) -> IwdgStop

Independent watchdog counter freeze in Stop mode

pub fn set_iwdg_stop(&mut self, val: IwdgStop)

Independent watchdog counter freeze in Stop mode

pub const fn iwdg_stdby(&self) -> IwdgStdby

Independent watchdog counter freeze in Standby mode

pub fn set_iwdg_stdby(&mut self, val: IwdgStdby)

Independent watchdog counter freeze in Standby mode

pub const fn wwdg_sw(&self) -> WwdgSw

Window watchdog selection

pub fn set_wwdg_sw(&mut self, val: WwdgSw)

Window watchdog selection

pub const fn swap_bank(&self) -> SwapBank

Swap banks

pub fn set_swap_bank(&mut self, val: SwapBank)

Swap banks

pub const fn dualbank(&self) -> Dualbank

Dual-bank on 1-Mbyte and 512-Kbyte Flash memory devices

pub fn set_dualbank(&mut self, val: Dualbank)

Dual-bank on 1-Mbyte and 512-Kbyte Flash memory devices

pub const fn bkpsram_ecc(&self) -> BkpsramEcc

Backup RAM ECC detection and correction enable

pub fn set_bkpsram_ecc(&mut self, val: BkpsramEcc)

Backup RAM ECC detection and correction enable

pub const fn sram3_ecc(&self) -> SramEcc

SRAM3 ECC detection and correction enable

pub fn set_sram3_ecc(&mut self, val: SramEcc)

SRAM3 ECC detection and correction enable

pub const fn sram2_ecc(&self) -> SramEcc

SRAM2 ECC detection and correction enable

pub fn set_sram2_ecc(&mut self, val: SramEcc)

SRAM2 ECC detection and correction enable

pub const fn sram2_rst(&self) -> bool

SRAM2 erase when system reset

pub fn set_sram2_rst(&mut self, val: bool)

SRAM2 erase when system reset

pub const fn n_swboot0(&self) -> NSwboot

Software BOOT0

pub fn set_n_swboot0(&mut self, val: NSwboot)

Software BOOT0

pub const fn n_boot0(&self) -> NBoot

nBOOT0 option bit

pub fn set_n_boot0(&mut self, val: NBoot)

nBOOT0 option bit

pub const fn pa15_pupen(&self) -> bool

PA15 pull-up enable

pub fn set_pa15_pupen(&mut self, val: bool)

PA15 pull-up enable

pub const fn io_vdd_hslv(&self) -> IoVddHslv

High-speed IO at low VDD voltage configuration bit This bit can be set only with VDD below 2.5V

pub fn set_io_vdd_hslv(&mut self, val: IoVddHslv)

High-speed IO at low VDD voltage configuration bit This bit can be set only with VDD below 2.5V

pub const fn io_vddio2_hslv(&self) -> IoVddioHslv

High-speed IO at low VDDIO2 voltage configuration bit This bit can be set only with VDDIO2 below 2.5 V.

pub fn set_io_vddio2_hslv(&mut self, val: IoVddioHslv)

High-speed IO at low VDDIO2 voltage configuration bit This bit can be set only with VDDIO2 below 2.5 V.

pub const fn tzen(&self) -> bool

Global TrustZone security enable

pub fn set_tzen(&mut self, val: bool)

Global TrustZone security enable

Trait Implementations

impl Clone for Optr

fn clone(&self) -> Optr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Optr

fn default() -> Optr

Returns the “default value” for a type.

impl PartialEq for Optr

fn eq(&self, other: &Optr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Optr

impl Eq for Optr

impl StructuralPartialEq for Optr