Struct stm32_metapac::rcc::regs::Apb1enr2

#[repr(transparent)]
pub struct Apb1enr2(pub u32);

RCC APB1 peripheral clock enable register 2

Tuple Fields

0: u32

Implementations

impl Apb1enr2

pub const fn i2c4en(&self) -> bool

I2C4 clock enable Set and cleared by software

pub fn set_i2c4en(&mut self, val: bool)

I2C4 clock enable Set and cleared by software

pub const fn lptim2en(&self) -> bool

LPTIM2 clock enable Set and cleared by software.

pub fn set_lptim2en(&mut self, val: bool)

LPTIM2 clock enable Set and cleared by software.

pub const fn i2c5en(&self) -> bool

I2C5 clock enable This bit is set and cleared by software. Note: This bit is only available on some devices in the STM32U5 Series. Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value.

pub fn set_i2c5en(&mut self, val: bool)

I2C5 clock enable This bit is set and cleared by software. Note: This bit is only available on some devices in the STM32U5 Series. Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value.

pub const fn i2c6en(&self) -> bool

I2C6 clock enable This bit is set and cleared by software. Note: This bit is only available on some devices in the STM32U5 Series. Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value.

pub fn set_i2c6en(&mut self, val: bool)

I2C6 clock enable This bit is set and cleared by software. Note: This bit is only available on some devices in the STM32U5 Series. Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value.

pub const fn fdcan1en(&self) -> bool

FDCAN1 clock enable Set and cleared by software.

pub fn set_fdcan1en(&mut self, val: bool)

FDCAN1 clock enable Set and cleared by software.

pub const fn ucpd1en(&self) -> bool

UCPD1 clock enable Set and cleared by software.

pub fn set_ucpd1en(&mut self, val: bool)

UCPD1 clock enable Set and cleared by software.

Trait Implementations

impl Clone for Apb1enr2

fn clone(&self) -> Apb1enr2

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Apb1enr2

fn default() -> Apb1enr2

Returns the “default value” for a type.

impl PartialEq for Apb1enr2

fn eq(&self, other: &Apb1enr2) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Apb1enr2

impl Eq for Apb1enr2

impl StructuralPartialEq for Apb1enr2